27 Installing your DVD recorder

If the time is incorrect, this could be due to a weak or disrupted TV signal. If this is the
case, switch off the automatic function.
1Press SYSTEM-MENU on the remote control. The menu bar will appear.
2Select “ ” using t or u.
3Select line “Installation” using w or v and confirm with u.
4Select line “Time/date” using w or v and confirm with u.
5Select “Manual” with w or v.
6Confirm with ENTER/OK.
7Change the time in line “Time” using the number buttons 0..9 on your remote
control.
8Check “AM/PM”, “Year”,Month”, and “Date” in the same way.
To select between the fields, use w or v.
Change the information with t, u or the number buttons 0..9.
9Select one of the following settings in line “Daylight Saving”:
On”: The time set corresponds to the summer time (summer time is on)
Off”: The time set corresponds to the winter time (summer time is off)
0 When all settings are correct, confirm with ENTER/OK.
ATo end, press SYSTEM-MENU.
If the setting has been confirmed with OK the automatic system is disabled.
Manually setting the time & date
Time/date
Manual
Time 09:02
AM/PM AM
Year 01
Month 01
Date 01
Daylight Saving Off
To exit press
SYSTEM MENU