Access control (Child Lock) 64

English

Changing the country

The set filter values depend on the respective country. It is therefore necessary to
enter the country to which these filter values apply.
1Switch on the TV set. If required, select the programme number for the DVD
recorder.
2Switch on the DVD recorder using B/I.
3Press SYSTEM-MENU. The menu bar appears
4Select the “ ” icon using t or u.
5Select line “ (Disc features)” using w or v and confirm with u.
6Confirm the line “Access control” using u.
7Enter your four-digit code. If the code is new, you may have to enter the code a
second time as confirmation.
8Select “Change country” using w or v and confirm with u.
9Select the corresponding country using v or w and confirm with ENTER/OK.
0To end, press t and then SYSTEM-MENU.
1Switch on the TV set. If required, select the programme number for the DVD
recorder.
2Switch on the DVD recorder using B/I.
3Press SYSTEM-MENU. The menu bar appears
4Select the “ ” icon using t or u.
5Select “ (Disc features)��� using w or v and confirm with u.
6Confirm “Access control” using u.
7Enter your four-digit PIN code. If the code is new, you may have to enter the code
a second time as confirmation.
8Select “Change code” using v or w and confirm with u.
9Enter the new code using the number buttons 0..9. Enter the same code again as
confirmation.
0Quit using t and SYSTEM-MENU.
Changing the PIN code
Tip
I have forgotten my code
Press STOP four times (step 7), then press ENTER/OK. Access control is
now switched off. You can now enter a new code as described above.
n
Access control Enter code . . .
Auto resume On
Disc features
n
Access control Enter code . . .
Auto resume On
Disc features