![](/images/new-backgrounds/1201903/201903121x1.webp)
Timer |
|
|
|
|
Timer List |
|
| Rec | |
|
|
|
| |
Date | Ch. Start | End | Mode | |
01/22 | 01 | 04:25PM | 06:05PM | M2 |
Total record time: 01:40 |
| |||
To change |
| To exit | ||
Press > |
|
| Press TIMER | |
|
|
|
|
|
English
9Switch off with B/I.
The programmed recording will only function properly if the DVD recorder has been switched off using the B/I button.
If any of the TIMER blocks are in use,“TIMER” will light up on the recorder display.
How to change or delete a programmed recording (TIMER)
1Switch on the TV set. If required, select the programme number for the DVD recorder (channel 3 or 4).
2Press TIMER on the remote control.
The programming mode selected last is marked.
3Select “Timer List” using w or v and confirm with u.
4Select the programmed recording (TIMER) you want to check, change or delete with w or v.
Tip
Delete programmed recording
1Press the CLEAR button.
2Confirm with ENTER/OK.“Timer Cleared” will briefly appear on the TV screen.
3To end, press TIMER.
5Press u.
Select the input field with t or u.
If required, change the information with v, w or the number buttons 0..9.
6Confirm with ENTER/OK.
7To end, press TIMER.
8Switch off with B/I.
Programming a recording (TIMER) | 56 |