14
Operation
Subtitles
1Select Z in the menu bar or press SUBTITLE
on the remote control directly.
2Press SUBTITLE or 3/4 repeatedly to select the
different subtitles.
Special VCD & SVCD Features
Playback Control (PBC)
1Load a Video CD with PBC and press PLAY.
2Go through the menu with the buttons indicated
on the Video monitor until your chosen passage
starts to playback. If a PBC menu consists of a list
of tracks, you can select a track directly.
3Enter your choice with the numeric buttons.
4Press RETURN/RESUME to go back to the
previous menu, if applicable on the menu.
5You may also select PBC off under Personal
Preferences.
➜ When set to off, PBC menus are not
activated for further playback.
Note:
When PBC is on, you cannot operate resume,
shuffle, repeat, A-B repeat, scan, time search and
FTS.
Special CD & MP3 Features
CD text and MP3 text
1Some CD or MP3-CD discs may contain text
information (eg. track name, album name, artist
name etc.) which will appear on the front display
and video monitor during playback.
2By default, CD text display is set to ON.
3To switch off the CD text display, press CD
TEXT/BIT RATE during playback.
4Press CD TEXT/BIT RATE again to switch on the
text display mode.
General Features
Note:
– Unless stated, all operations described are
based on remote control use. Some operations can
be carried out using the menu bar on the Video
monitor.
Moving to another title/chapter
DVD
VCD
When a disc has more than one title/track or
chapter, you can move to another title/chapter as
follows:
1Press ON SCREEN, then select W or X in the
menu bar.
2Press 34 or numeric buttons to select a title/
chapter.
CD
1Press T or S briefly during playback to go
to the next track or to return to the beginning
of the currect track respectively.
2Press S twice briefly to step back to the
previous track.
3To go directly to any track, enter the track
number using the numeric buttons.
Note:
–Long press of the T or S will switch on
backward or forward search (see serch section).
Search
DVD
VCD
1Select in the menu bar and press 4.
2Use 1/2 to select the required speed: –32, –8 or
–4 (backward), or +4, +8, +32 (forward).
3Select 1 or press PLAY to play the disc at normal
speed again.
●To exit the search mode, press 3.
(Playback continues at the selected speed.)
CD
●To search forward or backward through different
speeds, you can also hold down T or S
for more than two seconds.