8.Music Stand installation

9. ID Function

NOTE:

When setting up your system, be sure to turn the DX27 and any effects units used on BEFORE turning the main amplifier system on. This will prevent the initial power-on shock surge from possibly damaging your amplifier and speaker system.

The music stand supplied with the DX27 fits into the two sockets on the rear panel (see diagram).

It is possible to change the “Welcome to DX!” message which appears when the power is first switched ON to anything you like-your name, for example. To change the ID, hold the KEY SHIFT button while turning the power ON. The current ID message will be displayed with a cursor over the first character.

The cursor can then be moved to any character position on the display by successively pressing the KEY SHIFT button.

Choose the position to enter a new character, then using the DATA ENTRY slider or buttons, select the new character from the available character set.

Move the cursor to the next character position and enter the next character as described above. When your new ID message is complete, simply press any button other than the KEY SHIFT, DATA ENTRY, STORE or FUNCTION buttons to enter the normal operation mode. The new ID message you have entered will now be displayed every time you turn the instrument ON.

4