Connecting Antennas
To enjoy radio on the receiver, connect the supplied AM and FM antennas to the designated terminals. If there is a problem of weak radio wave reception in your area or you want to improve radio reception, we recommend that you use optional outdoor antennas. For details, consult the nearest authorized YAMAHA dealer or service center.
Note
Be sure to set the tuner frequency step (Asia and Taiwan models only) according to the frequency spacing in your area (see page 38).
AM loop antenna (supplied)
Indoor FM antenna (supplied)
| ANTENNA | SPEAKERS |
| 75 |
|
DOCK | UNBAL. |
|
6 | MIN / SPEAKER | |
DVD/CD | FM |
|
| R | L |
| GND |
|
IN
TAPE/MD
OUTAM
AUX
R L
Ground
(GND terminal)
■About grounding
For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.
Connecting the AM loop antenna
Note
Depending on the product, the shape of the tab is different from the described illust.
3Insert the AM loop antenna lead wires into the AM terminal.
4Replace the tab back to secure the wire.
PREPARATION
1Attach the antenna stand to the antenna.
When attaching the antenna to the wall, you do not need to use the antenna stand.
5Repeat steps 2 to 4 to insert the AM loop antenna lead wires into the GND terminal.
6Place the antenna away from the receiver and speaker cables.
While listening to the radio, rotate the antenna head to find the best angle for reception.
|
| Connecting the FM antenna |
2 Press down the tab of the AM terminal. |
|
1 Connect the supplied indoor FM antenna to the FM jack of the receiver.
2 Place the antenna away from the receiver and speaker cables.
English