Yamaha E810 20 En, Step 3: Set the aspect ratio, Step 4: Set the OSD language

Setting the System

5Press TIME ADJ once again to confirm the clock setting.

“Adjusted” appears in the front panel display for a few seconds, and then the clock appears.

y

You can switch between 12-hour (AM/PM) format and 24-hour format by pressing HOUR or MIN while the clock is displayed in the front panel display.

Step 3: Set the aspect ratio

Follow the procedure below to configure the aspect ratio setting of the DVD player. (The default setting is “4:3 PAN SCAN”.)

ON SCREEN	PRESET	MENU
INFO.			Cursor keys,
A-E	ENTER	A-E
			ENTER
SET UP		TOP MENU
		/RETURN
SET UP
TV VOL		VOLUME
	DISPLAY

VIDEO SETUP PAGE

TV TYPE	4:3 PAN SCAN
TV DISPLAY	4:3 LETTER BOX
PROGRESSIVE	16:9
PICTURE SETTING
COMPONENT

1Press SET UP.

The setup menu appears on the TV screen.

2Press or repeatedly to select “VIDEO SETUP PAGE”.

3Press or to select “TV DISPLAY”, and then press .

4Press or to select the desired setting, and then press ENTER to confirm the selection.

4:3 PAN SCAN

Select this if the aspect ratio of your TV is 4:3 and you want both sides of the picture to be trimmed or formatted to fit your TV screen.

4:3 LETTER BOX

Select this if the aspect ratio of your TV is 4:3. In this case, a wide picture with black bands on the upper and lower portions of the TV screen are displayed.

16:9

Select this if you have a widescreen TV.

5To exit from the setup menu, press SET UP once again.

Step 4: Set the OSD language

Follow the procedure below to configure the language setting used for the OSD and setup menus. (The default settings is “ENGLISH”.)

ON SCREEN	PRESET	MENU
INFO.			Cursor keys,
A-E	ENTER	A-E
			ENTER
SET UP		TOP MENU
		/RETURN
SET UP
TV VOL		VOLUME
	DISPLAY

GENERAL SETUP PAGE

DISC LOCK	ENGLISH
PROGRAM	DANSK
OSD LANGUAGE	DEUSTCH
SCREEN SAVER	ESPAÑOL
DIVX(R) VOD CODE	FRANÇAIS
	ITALIANO
	NEDERLANDS
	NORSK

1Press SET UP.

The setup menu appears on the TV screen.

2Press or to select “GENERAL SETUP PAGE”.

3Press or to select “OSD LANGUAGE”, and then press .

4Press / to select the desired language, and then press ENTER to confirm the selection.

20 En