Restricting Disc Playback

Locking a disc

You can prevent up to 40 specific discs from playback by locking the discs.

1While the disc to be locked is loaded into the unit, press SET UP.

2Press or to select “GENERAL SETUP

PAGE”, press or to select “DISC LOCK”, and then press .

3Press or to select “LOCK”, and then press ENTER.

To disable a lock applied to a disc

Select “UNLOCK” in step 3.

y

•To return to the previous menu, press . To exit from the setup menu, press SET UP.

•To unlock the disc lock temporarily for playback, use the number keys to enter the password in the password input area (displayed when the locked disc is loaded), and then press

ENTER.

Changing the password

Follow the procedure below to change the password to access locked disc temporarily.

1Press SET UP.

The setup menu appears on the TV screen.

2Press or to select “PREFERENCE

PAGE”, press or to select “PASSWORD”, then press .

Note

“PREFERENCE PAGE” is available only when no disc is loaded or the DVD player is in the Stop mode (see page 25).

3Press ENTER to display the Password change screen.

4Use the number keys to enter the current

6-digit password in the “OLD PASSWORD” area, enter the new 6-digit password in the “NEW PASSWORD” and “CONFIRM PWD” areas, then press ENTER.

Notes

•The default password is “000000”.

•If you forget your password, enter “000000” instead of your password.

y

To return to the previous menu, press . To exit from the setup menu, press SET UP.

36 En