FM/AM Tuning
■To switch the frequency step
(Asia and Taiwan models only)
Because the interstation frequency spacing differs in different areas, you may need to switch the frequency step mode.
NATURAL SOUND STEREO RECEIVER
|
|
|
|
|
|
| PURE DIRECT |
TIMER | DISPLAY | MEMORY | AUTO/MAN'L | PRESET/BAND | PRESET/TUNING | VOLUME | |
|
|
|
|
|
|
| |
|
| TIME ADJ | TIMER |
| HOUR | MIN |
|
STANDBY/ON | BASS |
| TREBLE | BALANCE |
| INPUT |
|
|
|
|
| ||||
| PHONES |
|
|
|
|
|
|
|
|
|
| L | R |
|
|
|
|
|
|
|
| MIN | MAX |
STANDBY/ON PRESET/BAND
1While the receiver is in the standby mode, hold down PRESET/BAND on the front panel, and then press STANDBY/ON.
The receiver turns on.
2Press PRESET/BAND repeatedly to select “FM 50k/AM 9k” or “FM 100k/AM 10k”.
3To confirm the setting, press STANDBY/ON.
Follow the procedure below to preset radio stations automatically.
NATURAL SOUND STEREO RECEIVER
|
|
|
|
|
|
| PURE DIRECT |
TIMER | DISPLAY | MEMORY | AUTO/MAN'L | PRESET/BAND | PRESET/TUNING | VOLUME | |
|
|
|
|
|
|
| |
|
| TIME ADJ | TIMER |
| HOUR | MIN |
|
STANDBY/ON | BASS |
| TREBLE | BALANCE |
| INPUT |
|
|
|
|
| ||||
| PHONES |
|
|
|
|
|
|
|
|
|
| L | R |
|
|
|
|
|
|
|
| MIN | MAX |
MEMORY INPUT
1Rotate INPUT on the front panel of the receiver to select “TUNER” as an input source.
2Hold down MEMORY for more than two seconds.
The AUTO and MEMORY indicator flash in the front panel display.
•Auto Preset starts at the lowest frequency toward the highest frequency.
•The receiver automatically applies a preset number to each detected station.
Notes
•You can preset up to 40 of AM and FM stations by automatic preset tuning.
•(U.K. and Europe models only)
Only Radio Data System broadcasting stations and AM stations are stored automatically by automatic preset tuning.