761-079a

2 1

762-040

6v

6v

12v

762-041

w

q

763-238a

AE01100

Battery Charging

NOTE:

The generator DC rated voltage is 12V.

1.Wind the battery charging lead 2 or 3 turns around the handle and plug into DC receptacle.

NOTE:

9Make connections to the battery after starting the engine.

9Clamp the red wire to the positive (+) terminal and the black wire to the negative (-) terminal of the battery. Do not reverse these positions.

1Red

2 Black

2.Start the engine.

3.Press in the DC protector and install the battery.

cC

9Be sure the economy control switch is turned off while charging the battery.

9Be sure the battery leads are properly con- nected.

9Be sure the breather hose is properly connect- ed and is not damaged or obstructed.

9Reduce the load to the specified generator rated output if the DC protector turns off. If it turns off again, consult a Yamaha dealer.

NOTE:

Press to reset the DC protector.

1“RESET”

2 “OFF”

NOTE:

9At full charge, electrolyte specific gravity is between 1.26 and 1.28.

9Check specific gravity hourly.

– 17 –