q

w

788-009

4

3

700-124

5

700-118b

700-120

6 700-126a

0°C25°C

A YAMALUBE 4(10W-30)

D SAE 10W

C SAE #20

B SAE #30

32°F80°F

700-065

AE01159

ENGINE OIL REPLACEMENT

1.Place the generator on a level surface and warm up the engine for several minutes.

Then stop the engine and turn the fuel cock knob to “OFF”. Turn the fuel tank cap air vent knob clockwise.

2.Loosen the screw 1 and remove the cover 2.

3.Remove the oil drain joint 3 pushing downward from the bottom of the generator and remove the oil filler cap 4.

4.Attach the oil drain joint 5 to the oil filler hole.

5.Place an oil pan under the engine. Tilt the genera- tor to drain the oil completely.

6.Replace the generator on a level surface and remove the oil drain joint.

7.Add engine oil to the upper level of the filler hole using the oil filler guide.

6Oil filler guide

cC

Do not tilt the generator when adding engine oil. This could result in overfilling and damage to the engine.

Recommended oil:

åYAMALUBE 4 (10W-30) or SAE 10W-30 type SE motor oil

∫SAE #30 ç SAE #20 ∂ SAE 10W

Engine oil quantity: 0.32 L (0.28 lmp qt, 0.34 US qt)

– 23 –