17
EMX2000—Owner’s Manual
Specifications■General specifications
Maximum output power STEREO:200 W+200 W/4Ω@0.5% THD at 1 kHz
BRIDGE: 400 W/8Ω@0.5% THD at 1 kHz
Frequency response
20 Hz~20 kHz +1 dB, –3 dB
@1 W output into 8Ω
(SPEAKER OUT) All channel Gain controls at minimum.
20 Hz~20 kHz +1 dB, –3 dB
@+4 dB output into 600Ω
(ST OUT, MONO OUT, EFFECT
SEND, MONITOR OUT)
All channel Gain controls at minimum.
Total harmonic distortion Less than 0.5% @20 Hz~20 kHz, 100 W output into 4Ω (SPEAKER OUT)
Less than 0.3% @20 Hz~20 kHz, +14 dB output into 600Ω
(ST OUT, MONO OUT, EFFECT SEND, MONITOR OUT)
Hum & noise
(Average, Rs=150Ω)
(with 20 Hz~20 kHz BPF)
–128 dB equivalent input noise
–63 dB residual output noise (SPEAKER OUT)
–95 dB residual output noise (ST OUT, MONO OUT, EFFECT SEND, MONITOR OUT)
–87 dB
(ST OUT, MONO OUT) ST master/MONO master fader at maximum level and all
channel fader at minimum.
–64 dB (68 dB S/N)
(ST OUT, MONO OUT) ST master/MONO master fader and 1 channel fader at maxi-
mum level. And 1 channel Gain control at maximum.
–80 dB
(EFFECT SEND, MONITOR OUT) Master fader at maximum level and all channel level controls
at minimum.
Maximum voltage gain
91 dB MIC IN to SPEAKER OUT (CH 1~8)
64 dB MIC IN to ST OUT (CH 1~8)
38 dB LINE IN to ST OUT (CH 1~8)
38 dB ST IN to ST OUT (CH 9/10, 11/12)
70 dB MIC IN to EFFECT SEND (CH 1~8)
64 dB MIC IN to MONITOR OUT (CH 1~8)
Crosstalk at 1 kHz –70 dB adjacent input, –70 dB input to output
MIC IN gain control 44 dB variable
Input channel equalization
HIGH 10 kHz shelving*
MID 2.5 kHz peaking
LOW 100 Hz shelving*
* Turn over/roll off frequency of shelving: 3 dB below maximum variable level.
Meters 13 points LED meter
CH peak indicators Red LED on each channel lits when POST EQ signal reaches the level –3 dB below clipping.
Limiter Comp. : THD≥0.5%
LIMIT indicators Lit when THD≥0.5%
Graphic equalizer 7 bands (125, 250, 500, 1k, 2k, 4k, 8k Hz), ±12 dB Maximum
Internal digital effect 16 programs
Foot switch Digital effect mute: on/off
Phantom power +48 V is supplied to electrically balanced inputs.
Option FC5
Power requirement USA and Canada 120 V AC 60 Hz
Europe 240 V AC 50 Hz
Other 230 V AC 50 Hz
Power consumption 210 W
Dimensions (WxHxD) 480×125×454 mm
Weight 14 kg