Yamaha F10, F11 Connecting the Power Cord (F11)

ENGLISH
Before Using the F11/F01
F11/F01 Owner’s Manual15
Connecting the Power Cord (F11)
Carefully read the following instructions and warnings before connecting the power cord.
1. Connect the supplied power cord to the [AC INLET] connector on the instrument’s rear panel. For an illustration of the
location of the [AC INLET] connector, see “Panel Controls and Terminals” (page 10).
2. Connect the other end of the power cord to an AC outlet. Make sure your F11 meets the voltage requirement for the
country or region in which it is being used.
In some areas, a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.
WARNING
Make sure your F11 is rated for the AC voltage supplied in the area in which it is to be used (as listed
on the rear panel). Connecting the unit to the wrong AC supply can cause serious damage to the inter-
nal circuitry and may even pose a shock hazard!
WARNING
Use only the AC power cord supplied with the F11. If the supplied cord is lost or damaged and needs
to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire
and shock hazard!
WARNING
The type of AC power cord provided with the F11 may be different depending on the country in which
it is purchased (a third prong may be provided for grounding purposes). Improper connection of the
grounding conductor can create the risk of electrical shock. Do NOT modify the plug provided with the
F11. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not
use a plug adapter which defeats the grounding conductor.
(The shape of plug differs
depending on your particular
locale.)
[AC INLET] connector