F11/F01 Owner’s Manual
36
ENGLISH
Selecting & Playing Voices
Transposition – [TRANSPOSE]
This instrument’s Transpose function makes it possible to easily match the pitch of the keyboard in semitone intervals to
the range of a singer or other instruments. For example, if you set the transposition amount to “5,” playing the C key pro-
duces a pitch of F. In this way, you can play a song as though it were in C major, and the F11/F01 will automatically trans-
pose it to the key of F.
Press one of the F#5-F#6 keys while holding the [BGM] but-
ton (see Quick Operation Guide). The current amount of
transposition appears on the display while both controls are
held.
To transpose the pitch down (in semitone steps)
Press one of the F#5-B5 keys while holding the [BGM] button.
To transpose the pitch up (in semitone steps)
Press one of the C#6-F#6 keys while holding the [BGM] button.
To initialize the normal pitch
Press the C6 key while holding the [BGM] button.
Fine Tuning of the Pitch
You can fine tune the pitch of the entire instrument. This function is useful when you play the F11/F01 along with other
instruments or CD music. For the key assignment, refer to the Quick Operation Guide.
You can also use the keyboard to set the pitch.
To tune up (in about 0.2Hz steps)
Hold the A-1, B-1, and C0 keys simultaneously and press any key between C3 and B3.
The current pitch setting appears on the display while the key combination is held.
Example:
432.0Hz
To tune down (in about 0.2Hz steps)
Hold the A-1, B-1, and C#0 keys simultaneously and press any key between C3 and B3.
The current pitch setting appears on the display while the key combination is held.
To initialize standard pitch
Hold the A-1, B-1, C0, and C#0 keys simultaneously and press any key between C3 and
B3. The current pitch setting appears on the display while the key combination is held.
Operation
TERMINOLOGY
Transpose:
Changing the key signature of a
song. On the F11/F01, trans-
posing shifts the pitch of the
entire keyboard.
TIP
The transposition range:
F#5: -6 semitones (down one
octave)
C6: normal pitch
F#6: +6 semitones (up one
octave)
TIP
Notes below and above the C-2
…. G8 range of the F11/F01
sound one octave higher and
lower, respectively.
Transposition
TERMINOLOGY
Hz (Hertz):
This unit of measurement refers
to the frequency of a sound and
represents the number of times
a sound wave vibrates in a sec-
ond.
TIP
Setting range:
F11: 414.8Hz - 466.8Hz
F01: 427.0Hz - 453.0Hz
TIP
Normal setting:
440.0Hz
Operation