F11/F01 Owner’s Manual
52
ENGLISH
Connections
CAUTION
When the F11/F01’s AUX IN jacks are connected to an external device, first turn on the
power to the external device, then to the F11/F01. Reverse this order when you turn
the power off.
3USB [TO DEVICE] terminal
This terminal is for connection to a USB flash memory device. For more informa-
tion, refer to “Handling the USB Storage Device (USB Flash Memory/Floppy Disk,
etc.)” on page 25.
4MIDI [IN][OUT] connectors
Use MIDI cables to connect external MIDI devices to these connectors.
Refer to “About MIDI” on page 53 for more information.
5[LAN] port (F11)
This port allows direct connection of the F11 to the Internet, letting you use a spe-
cial streaming service on the Yamaha website for playing back songs in a variety of
musical genres as background music on the instrument. Before connecting the
instrument to the Internet, be sure to read “Internet Direct Connection (IDC)
(F11)” on page 42.
Connecting to a Computer
By connecting the F11/F01 to a computer, performance data of the instrument can be
used on the computer, and also performance data from the computer can be sent to
and play the sounds of the F11/F01.
A Yamaha UX16 or similar USB-MIDI interface (sold separately) will be necessary for
MIDI connection between the F11/F01 and a USB-equipped computer. Make sure to
purchase a Yamaha UX16 or a quality USB-MIDI interface at a musical instrument
store, computer store or electrical appliance store. If you use the UX16 interface, install
the driver supplied with the interface on your computer.
R
AUX IN
L L R
F11/F01
phone plug
(standard)
AUX IN
audio cable
phone plug
(standard)
AUX OUT
Tone
Generator
Tone
Generator
stereo phone plug
(standard)
OUTPUT
AUX IN
audio cable
phone plug
(standard)
USB
MIDI
OUT IN
OUT
IN
USB
MIDI OUT MIDI IN
A USB-MIDI interface
(such as the Yamaha UX16)