F11/F01 Owner’s Manual
38
ENGLISH
Recording Your Performance
Recording Your Performance
The ability to record and play back what you’ve played on the F11/F01
keyboard can be an effective practice aid. The F11/F01’s Song Recorder
allows the recording of one User song.
1Exit from BGM mode.
Press the [BGM] button to exit from BGM mode (page 12).
2Make all the initial settings.
Before you begin to record, select the voice you want to record (or voices if you
will be using Dual or Split mode). Make any other desired settings (tempo,
reverb, etc.) as well. You might also want to set the volume.
You can also adjust the playback volume using [VOLUME] control.
3Turn the [REC] button on.
Press the [REC] button. Recording does not actually start yet.
The [REC] button indicator flashes in red.
The [PLAY/STOP] button indicator will flash at the current METRO-
NOME tempo setting.
CAUTION
Record mode can be disengaged before recording by pressing the [REC] button a sec-
ond time.
CAUTION
Keep in mind that when recording starts, the previously recorded data will be erased.
Please be careful not to erase important data.
TIP
You can record your perfor-
mance (audio data) to a cas-
sette tape recorder or other
recording device via the AUX
OUT[L/L+R][R] connector
(page 51).
Recording vs. Saving:
The format of performance data recorded on a cassette tape differs from that of
data recorded on the F11/F01. A cassette tape records audio signals. The F11/F01
“saves” information regarding note timing, voices, and a tempo value, but not
audio signals. When you play back recorded songs, the F11/F01 produces sound
based on the saved information. Therefore, recording on the F11/F01 may be
more accurately called “saving information.” However, this book often uses the
word “recording” because it seems to make more sense.

345 42

1
NOTE
A voice demo and a 50 Piano
Preset Song (Classic & Jazz)
cannot be played while the
[REC] button is on.
Operation
NOTE
You cannot record the perfor-
mance to the connected USB
flash memory directly. The
recorded songs are saved to the
instrument automatically. If you
want to save data to USB flash
memory, perform the Save
operation (page 41) after stop-
ping recording.