ENGLISH
Internet Direct Connection (IDC) (F11)
F11/F01 Owner’s Manual47
Exporting the Connection Information
This procedure lets you export the detailed information on the current connection as a
text file to a USB flash memory device. You can check the information on your com-
puter.
1Turn on the Export mode.
Make sure that a USB flash memory device is connected to the instrument, and
then press the [MOVING KEY] button while holding down the [BGM] button.
CAUTION
To cancel exporting, press any button (except the [PLAY/STOP], [–/NO] and
[+/YES] buttons) before pressing the [PLAY/STOP] button in step 2.
2Start exporting.
Press the [PLAY/STOP] button.
A “n–y” message will appear on the display if a USB flash memory device con-
tains a file with the same name as the one you are attempting to export. Press
the [+/YES] button to execute the overwriting operation. Press the [–/NO] but-
ton to cancel exporting.
When exporting to the USB flash memory device
is completed, an “End” message will appear on
the display. Press any button to exit from this dis-
play.
After exporting, connect the USB flash memory device to your computer, and
then open the text file named “ConnectionInfo.txt” in the root directory of the
USB flash memory device to check the detailed connection information.
NOTE
The connection information file
does not allow you to manually
make Internet settings. The con-
nection information file is set to
“read only” and cannot be edited.
2
1
NOTE
The export mode cannot be
engaged while voice demo song
playback is in use (page 29) or
the unit is in BGM mode
(
page 12
) or when the [REC]
button is on (page 38) or user
song playback is active
(
page 40
).
Operation
NOTE
If exporting is not successfully
completed, an “Err” message
and the error code will appear
alternately on the display.
NOTE
Error Code
You can check the description
for the error code on the
Yamaha website:
http://music.yamaha.com/idc