E

 

 

 

 

 

 

 

 

 

EMU00961¯

 

 

 

 

 

 

 

 

Emergency Starting Engine

 

 

 

 

1)

Remove the top cowling.

 

 

 

e

 

 

 

 

w

 

2)

Remove the start-in-gear protection

 

 

 

q

 

cable 1 from the starter after remov-

 

 

 

 

ing the clip 2 and the screw 3 if the

 

 

 

 

 

cable is equipped.

 

 

 

 

3)

Remove the starter/flywheel cover

 

 

 

 

 

 

 

 

 

 

 

 

 

after removing 4 bolts.

 

 

 

 

 

Disconnect the leads for the warning

 

 

 

 

 

indicator.

208061

208062

OFF ON START

4)Prepare the engine for starting. See “STARTING ENGINE” for procedures. Be sure the engine is in Neutral and that the lock-plate on the end of lan- yard is attached to the engine stop lanyard switch. Set the main switch to “ON” if equipped.

506021***

5-7