UP DN
UP
DN
E
EMU00296
PROCEDURE FOR TILTING UP
Power trim/tilt model
1) Remove the
304043
2)Push the power trim/tilt switch “UP”
until the outboard has tilted up com- pletely.
701034*
3) Push the tilt support knob into the clamp bracket to support the engine.
w
After tilting the engine, be sure to support it with the tilt support knob. Otherwise, the engine could fall back down suddenly if oil in the power trim/tilt unit should lose pressure.
403054
EMU00305
PROCEDURE FOR TILTING DOWN
Power trim/tilt model
1)Push the power trim/tilt switch “UP” until the engine is supported by the tilt rod.
2)Pull out the tilt support knob.
3)Push the power trim/tilt switch “DN” (Down) to lower the engine to the desired position.