E
000912
q
601025
EMU01415
CHANGING ENGINE OILw
8Avoid draining the engine oil immediately after stopping the engine. The oil is hot and should be handled with care to avoid burns.
8Be sure the outboard is securely fastened to the transom or a stable stand.
cC
8Change the engine oil after the first 10 hours of operation, and every 100 hours or at
8Do not overfill the oil, and be sure the engine is in an upright position (not tilt- ed) when checking and changing the engine oil.
8If the oil level is above the upper level mark, drain until the level meets the specified capacity. Overfilling the oil may cause leakage or damage.
1)Put the outboard motor in an upright position (not tilted).
2)Prepare a suitable container which can hold a larger amount than the engine oil capacity. Loosen and remove the drain bolt 1 while hold- ing the container under the drain hole. Let the oil drain completely. Wipe up any spilled oil immediately.
3)Put a new gasket on the drain bolt. Apply a light coat of oil to the gasket and reinstall the drain bolt.
Tightening torque:
Refer to “SPECIFICATIONS”, page