Operation

connect the fuel line to the joint. Then firmly connect the other end of the fuel line to the joint on the fuel tank.

ZMU03679

ZMU02024

3.If a steering friction adjuster is provided on your outboard motor, securely attach the fuel line to the fuel line clamp.

NOTE:

During engine operation place the tank hori- zontally, otherwise fuel cannot be drawn from the fuel tank.

4.Squeeze the primer pump with the outlet end up until you feel it become firm.

ZMU02025

EMU27490

Starting engine

EMU27662

Electric start and remote control models

1.Place the remote control lever in neutral.

NOTE:

The start-in-gear protection device prevents the engine from starting except when in neu- tral.

2.Attach the engine stop switch lanyard to a secure place on your clothing, or your arm or leg. Then install the lock plate on the other end of the lanyard into the en-

gine stop switch.

EWM00120

WARNING

●Attach the engine stop switch lanyard to a secure place on your clothing, or your arm or leg while operating.

●Do not attach the lanyard to clothing that could tear loose. Do not route the

29