Operation

salt corrosion.

EWM00220

WARNING

Be sure all people are clear of the outboard motor when tilting up and down, also be careful not to pinch any body parts between the drive unit and engine bracket.

EWM00250

WARNING

Leaking fuel is a fire hazard. If there is a fuel joint on the outboard motor, disconnect the fuel line or close the fuel cock if the engine will be tilted for more than a few minutes. Otherwise fuel may leak.

ECM00241

CAUTION:

●Before tilting the outboard motor, stop the engine by following the procedure on page 32. Never tilt the outboard mo- tor while the engine is running. Severe damage from overheating can result.

●Do not tilt up the engine by pushing the tiller handle (if equipped) because this could break the handle.

EMU28005

Procedure for tilting up

Power trim and tilt models / power tilt models

1.Place the remote control lever / the gear shift lever in neutral.

N

2.Disconnect the fuel line from the out- board motor or close the fuel cock.

ZMU03638

3.Press the power trim and tilt switch / power tilt switch “” (up) until the out- board motor has tilted up completely.

UP

ZMU03639

4.Push the tilt support knob into the clamp bracket or pull the tilt support lever to- ward you to support the engine.

ZMU03196

35