Preparations and connections

60 mm

■Mounting the rear speakers

Mount the rear speakers on a shelf, rack or on the floor, or hang them on the wall.

English

Mounting bracket

Screw

Tapping screw (Available at the hardware store)

 

Min.

 

12 mm

or wall support

65 mm

Wall

 

To mount the rear speakers by using commercially available speaker stands

The provided mounting bracket has 1 pair of screw holes (at an interval of 60 mm). They are for mounting the speaker on a speaker stand.

* These screw holes can be used with M4 screws only.

Note

It is recommended that you connect the speaker cords to the speaker’s terminals before attaching the bracket to the speaker.

1 Attach the bracket to the bottom of the speaker by using the provided screw so that the convex part of the bracket fits in the grooved part of the speaker as shown left.

2 Mount the speaker on the speaker stand by using the screw holes on the bracket.

To mount the rear speakers directly on the wall

If desired, you can hang the speaker on the protruding screws on the wall without using the bracket.

Fasten screws into a firm wall or wall support as shown left, and hang the holes of the speaker on the protruding screws.

*Make sure that the screws are securely caught by a narrow part of the holes.

WARNING

•Each of the rear speakers weighs 0.8 kg (1 lbs. 12 oz.). Do not mount them on thin plywood or soft wall surface material, as the screws may come out of the flimsy surface, causing the speakers to fall and be damaged, or result in personal injury.

•Do not fasten the speakers to the wall with nails, adhesives, or other unstable hardware. Long-term use and vibrations may cause them to fall.

•To avoid accidents resulting from tripping over loose speaker cords, fix them to the wall.

•Select a proper position on the wall to mount the speaker and the stand so that no one will injure his/her head or face with the edge of the stand.

E-7