Yamaha GX707VCD Notes, English, Memory back-up, To recall a preset station, When the automatic preset tuning is completed;

Tuning operation

Automatic preset tuning

1

2

		DISC1 DISC2 DISC3
3–DISC VCD CHANGER		VI
		Versio
	STANDBY
STANDBY
/ON	TIMER
	INPUT	PRESET/TUNING/BAND A/B/C/D/E
		/
		UP
		DOWN

You can make use of an automatic preset tuning function. With this function, the built-in tuner performs automatic tuning. Up to 40 stations [8 stations x 5 groups (A, B, C, D and E)] are stored automatically.

1 Turn on the power.

2 Press INPUT or until “TUNER” ( 2, 7) appears on the display, or simply press TUNER on the remote control.

3 Press and hold MEMORY for more than 2 seconds.

* The “MEMORY” ( 6) and “AUTO” ( 4) indicators flash.

English

BASS	TREBLE	REC/	AUTO/
PHONES	MODE	DOLBY NR PAUSE	MANUAL	MEMORY	RANDOM
			TIMER	TIME ADJ	HOUR

3

POWER

1

1	2	3
1	2	3
4	5	6
4	5	6
7	8	9
7	8	2
		+I0
0	TUNER
PRESET		PRESET
TIME	PROG	R.TIME
A	B	C
EDIT	DISC SKIP	MODE
D		E
	VCD/CD
RETURN	/	SELECT
KARAOKE	INTRO	DIGEST
TIME INDEX	DIRECTION	TIME INDEX
REC/PAUSE	TAPE	TEST
— LEVEL		CENTER/
		REAR/ DELAY
PROGRAM		KEY/ECHO
		MUSIC
SLEEP		INPUT
		2

VOLUME

The tuner performs automatic tuning and searches for FM stations first and then AM stations. Received stations are programmed sequentially to A1, A2, A3 and so on.

When the automatic preset tuning is completed;

The display shows the frequencies of the first preset station (stored to A1).

If you want to check the contents and the number of preset stations, follow the procedure in the section “To recall a preset station” on page 24.

To recall a preset station

Simply follow the procedure in the section “To recall a preset station” on page 24.

Notes

•The automatic preset tuning search will be performed through all frequencies until 40 stations are stored. If the number of received stations is less than 40, the search will stop after searching all frequencies.

*Since FM stations are searched for first, there may be a case that 40 preset stations are occupied by FM stations only.

•With this function, only stations with sufficient signal strength are stored automatically. If the station you want to program is weak in signal strength, tune in to it with the Manual tuning method (in monaural) and program it by following the procedure in the section “To store stations” on page 24.

•You can replace a preset station with another FM or AM station manually by simply following the procedure in the section “To store stations” on page 24.

Memory back-up

The memory back-up circuit prevents the programmed data from being lost even if the AC supply lead is disconnected from the AC outlet or the power is cut due to temporary power failure. If, however, the power is cut for more than one week, the memory may be erased. If so, it can be re-programmed by simply following the Preset tuning steps.

E-23