TUNING
Automatic Preset Tuning (for FM
stations only)
You can make use of the automatic preset tuning function for FM stations only. This function enables the unit to automatically tune in with strong signals and to sequentially store up to 40 FM stations (5 groups x 8 stations).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| VOLUME |
STANDBY |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
/ON |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| INPUT MODE | 6CH INPUT |
|
|
|
|
|
|
|
|
|
|
|
|
| PRESET |
|
|
BASS |
| TREBLE | BALANCE | SPEAKERS |
|
|
|
|
| /TUNING | FM/AM | INPUT | |||
|
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
| A | B | PROGRAM |
| EFFECT |
| PRESET/TUNING | A/B/C/D/E |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| EDIT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| TUNING |
|
|
|
|
|
|
|
|
|
|
|
|
|
| MEMORY | MODE |
|
– | + | – | + | L | R | ON | OFF |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MAN'L/AUTO FM | AUTO/MAN'L MONO |
|
|
|
|
|
|
|
|
| PHONES | S VIDEO | VIDEO | L AUDIO R | OPTICAL |
|
|
|
|
|
|
|
|
|
|
| SILENT |
| VIDEO AUX |
|
|
|
| |
3 21
1 Press FM/AM to select the FM band.
FM/AM
2 Press TUNING MODE (AUTO/MAN’L MONO) so that the “AUTO” indicator lights up on the display.
TUNING
MODE
■Automatic preset tuning options
You can select the preset number from which the unit will store FM stations and/or begin tuning toward lower frequencies. Before automatic preset tuning begins (after pressing MEMORY in step 3),
1.Press A/B/C/D/E and PRESET/TUNING lor hto select the preset number with which the first station will be stored. The automatic preset tuning will stop when stations have all been stored up to E8.
2.Press PRESET/TUNING (EDIT) to turn “ z ” off and then press PRESET/TUNING lto begin tuning toward lower frequencies.
■When automatic preset tuning is completed
The display shows the frequency of the last preset station. Check the contents and the number of preset stations by following the procedure in the section “To Recall a Preset Station” on page 29.
Notes
• A new setting can be stored in place of the former one. |
• The reception mode is stored along with the station frequency. |
• You can manually replace a preset station with another FM or AM |
station by simply using the manual preset tuning method. |
• Even if the number of received stations is not enough to be stored |
up to E8, automatic preset tuning is automatically ended after |
searching for all stations. |
• Only FM stations with sufficient signal strength are stored by |
automatic preset tuning. If the station you want to store is weak in |
AUTO/MAN'L
Lights up
signal strength, tune in to it manually in monaural mode and store |
it by using the manual preset tuning method. |
3 Hold down MEMORY (MAN’L/AUTO FM) for about 3 seconds.
The preset number, the “MEMORY” and “AUTO” indicators flash. After about 5 seconds, automatic preset tuning begins from the frequency currently displayed toward the higher frequencies.
Received stations are sequentially stored as A1, A2 ...
A8. If more than 8 stations have been tuned, they are stored as preset station numbers in other groups (B, C, D and E) in that order.
MEMORY | AUTO |
BASS EXT. MEMORY
MAN'L/AUTO
Flashes
Memory |
The memory |
from being lost when this unit is set in the standby mode. |
If, however, the power cord is disconnected from the AC |
power outlet or the power is cut for more than one week, |
the memory will be erased. If so, store the stations again |
by using preset tuning methods. |
28