Yamaha HTR-5440, HTR-5450 55

					TROUBLESHOOTING

	Problem		Cause		Remedy	Refer to
	Problem		Cause		Remedy	page

	No sound from the effect	The sound effect is off.			Press EFFECT to turn it on.	25
	speakers.
	speakers.	A Dolby Surround, Dolby Digital or DTS			Select another DSP program.	47, 48
		A Dolby Surround, Dolby Digital or DTS			Select another DSP program.	47, 48
		decoding DSP program is being used with
		material not encoded with Dolby Surround,
		Dolby Digital or DTS.

		A 96-kHz sampling digital signal is being input				22
		to this unit.	HTR-5450 only

	No sound from the	The output level of the center speaker is set to			Raise the level of the center speaker.	37
	center speaker.	minimum.

		“CENTER SP” in the SET MENU is set to			Select the appropriate mode for your center	33
		NON.			speaker.
		One of the Hi-Fi DSP programs (1 to 4) has been			Select another DSP program.	47, 48
		selected.

		The source encoded with a Dolby Digital or				—
		DTS signal does not have a center channel
		signal.

	No sound from the rear	The output level of the rear speakers is set to			Raise the output level of the rear speakers.	37
	speakers.	minimum.

		A monaural source is being played with the			Select another DSP program.	47, 48
		program 9.

	No sound from the	“BASS OUT” in the SET MENU is set to			Select SWFR or BOTH.	34
	subwoofer.	MAIN when a Dolby Digital or DTS signal is
		being played.

		“BASS OUT” in the SET MENU is set to			Select BOTH.	34
		SWFR or MAIN when a 2-channel source is
		being played.
		The source does not contain low bass signals				—
		(90 Hz and below).

	Poor bass reproduction.	“BASS OUT” in the SET MENU is set to			Select MAIN.	34
		SWFR or BOTH and your system does not
		include a subwoofer.

		The output mode for each speaker (main, center			Select the appropriate output mode for each	33, 34
		or rear) in the SET MENU does not match your			speaker based on the size of the speakers in
		speaker configuration.			your configuration.

	A “humming” sound can	Incorrect cable connections.			Firmly connect the audio plugs. If the problem	12 – 15
	be heard.				persists, the cables may be defective.

APPENDIX

English

51

Contents

Page SAFETY INSTRUCTIONS FCC INFORMATION (for US customers only) We Want You Listening For A Lifetime CAUTION: READ THIS BEFORE OPERATING YOUR UNIT CONTENTS FEATURES GETTING STARTED Checking the Package Contents Control Battery Replacement CONTROLS AND FUNCTIONS Front Panel Page Remote Control Using the Remote Control Display Rear Panel SPEAKER SETUP Speakers to Be Used ■Use of a subwoofer expands your sound field Speaker Placement ■Main speakers CONNECTIONS Before Connecting Components Connecting Audio Components ■Connecting to digital jacks ■Connecting a CD player ■Connecting an MD recorder, CD recorder or tape deck Connecting an External Decoder Page Connecting Video Components ■Audio signal jacks ■Video signal jacks ■ S VIDEO jacks HTR-5450only ■VIDEO AUX jacks (on the front panel) Page Connecting Speakers ■Speaker cables ■Connecting to the MAIN SPEAKERS terminals ■Connecting to the REAR and CENTER SPEAKERS terminals ■Main speaker terminals ■Subwoofer connection IMPEDANCE SELECTOR Switch ■VOLTAGE SELECTOR (China and General models only) Connecting the Power Supply Cords ■AC OUTLETS (SWITCHED) ADJUSTING THE SPEAKER BALANCE Before You Start Adjusting Using the Test Tone Page PLAYING A SOURCE ■To mute the sound ■When you have finished using this unit ■Notes on the digital signal ■BGV (background video) function Input Modes and Indications ■Notes on playing a source encoded with a DTS signal Selecting a DSP Program ■On the remote control ■On the front panel ■Virtual CINEMA DSP and SILENT CINEMA off the effect speakers) TUNING Connecting the Antennas ■Connecting the indoor FM antenna ■Connecting the AM loop antenna 3 Automatic Tuning Manual Tuning Automatic Preset Tuning (for FM stations only) ■Automatic preset tuning options ■When automatic preset tuning is completed Manual Preset Tuning To Recall a Preset Station Exchanging Preset Stations RECORDING A SOURCE ■Special considerations when recording DTS software SET MENU Adjusting the Items on the SET MENU 1SPEAKER SET (speaker mode settings) ■CENTER SP (center speaker mode) ■MAIN SP (main speaker mode) ■REAR LR SP (rear speaker mode) ■BASS OUT (bass out mode) 2HP TONE CTRL (headphone tone control) 3 I/O ASSIGN ■3A (1) (for the OPTICAL OUTPUT jack) ■3B (2) to (4) (for the OPTICAL INPUT jacks) ■3C (5) (for the COAXIAL INPUT jack) 5 DOLBY D. SET (Dolby Digital set) ■LFE LEVEL ■D-RANGE(dynamic range) 6 DTS SET (DTS LFE level) 7 SP DLY TIME (center delay) 8DISPLAY SET ■DIMMER 9 MEM. GUARD (memory guard) DELAY TIME AND SPEAKER OUTPUT LEVELS Delay Time Sound Output Level of the Center Right Rear and Left Rear Speakers and Subwoofer Adjusting Method SLEEP TIMER Setting the SLEEP Timer Canceling the SLEEP Timer PRESET REMOTE CONTROL Component Selector Buttons Controlling the Components Connected to This Unit ■Example: To control YAMAHA CD player Description of Each Mode ■TAPE/MD MODE ■CD MODE ■DVD/LD MODE ■DVD MENU MODE ■ VCR MODE ■ CBL/SAT MODE ■TV MODE Setting the Manufacturer Code ■To use a second (and third) VCR Returning to the Factory Setting ■To return to the factory-setcodes in all modes ■To return to the factory-setcodes in each mode SOUND FIELD PROGRAM Hi-FiDSP Programs ■For audio sources: Nos. 1 to CINEMA DSP Programs ■For audio-videosources: Nos. 4 to ■For movie programs: Nos. 7 to ■MOVIE THEATER 1 and TROUBLESHOOTING ■ General Page Page ■Tuner ■Remote control SPECIFICATIONS (HTR-5450) SPECIFICATIONS (HTR-5440) GLOSSARY ■Dolby Surround ■Dolby Digital ■DTS (Digital Theater Systems) Digital Surround ■LFE 0.1 channel ■ S VIDEO signal HTR-5450only ■PCM (Linear PCM) ■Sampling frequency and number of quantized bits HTR-5450only ■I/O ASSIGN (SET MENU) INDEX LIST OF MANUFACTURER’S CODES LISTES DES CODES FABRICANT Page Page Page L Analog signal O Optical signal S Video signal Video signal Signal flow