Yamaha HTR-5440, HTR-5450 56

TROUBLESHOOTING

Problem

Cause

Remedy

Refer to

page

The volume level cannot

The component connected to the REC OUT

Turn on the power to the component.

—

be increased, or the

jacks of this unit is turned off.

sound is distorted.

The effect and surround

It is not possible to record the effect and

31

sounds cannot be

surround sounds by a recording component.

recorded.

A source cannot be

An analog source is being input during digital

Input a digital source.

HTR-5450 only

12 – 15

recorded.

recording.

HTR-5450 only

A source component and recording

Make digital connections.

HTR-5450 only

component are not digitally connected to the

unit.

HTR-5450 only

A digital source is being input during analog

Input an analog source.

recording.

A source component and recording

Make analog connections.

component are not analog connected to the

unit.

The settings of the SET

“9 MEM. GUARD” in the SET MENU is set

Select OFF.

39

MENU and some other

to ON.

settings on this unit

cannot be changed.

This unit does not

The internal microcomputer has been frozen by

Disconnect the AC power cord from the outlet

—

operate properly.

an external electric shock (such as lightning or

and then plug it in again after about 30 seconds.

excessive static electricity) or by a power

supply with low voltage.

The sound is degraded

This unit is in the standby mode.

Turn on the power of the unit.

—

when listening with

headphones connected

to a tape deck or CD

player that is connected

to this unit.

There is noise

The unit is too close to the digital or high-

Move the unit further away from such

—

interference from digital

frequency equipment.

equipment.

or high-frequency

equipment, or the unit.

52

Contents

Page SAFETY INSTRUCTIONS FCC INFORMATION (for US customers only) We Want You Listening For A Lifetime CAUTION: READ THIS BEFORE OPERATING YOUR UNIT CONTENTS FEATURES GETTING STARTED Checking the Package Contents Control Battery Replacement CONTROLS AND FUNCTIONS Front Panel Page Remote Control Using the Remote Control Display Rear Panel SPEAKER SETUP Speakers to Be Used ■Use of a subwoofer expands your sound field Speaker Placement ■Main speakers CONNECTIONS Before Connecting Components Connecting Audio Components ■Connecting to digital jacks ■Connecting a CD player ■Connecting an MD recorder, CD recorder or tape deck Connecting an External Decoder Page Connecting Video Components ■Audio signal jacks ■Video signal jacks ■ S VIDEO jacks HTR-5450only ■VIDEO AUX jacks (on the front panel) Page Connecting Speakers ■Speaker cables ■Connecting to the MAIN SPEAKERS terminals ■Connecting to the REAR and CENTER SPEAKERS terminals ■Main speaker terminals ■Subwoofer connection IMPEDANCE SELECTOR Switch ■VOLTAGE SELECTOR (China and General models only) Connecting the Power Supply Cords ■AC OUTLETS (SWITCHED) ADJUSTING THE SPEAKER BALANCE Before You Start Adjusting Using the Test Tone Page PLAYING A SOURCE ■To mute the sound ■When you have finished using this unit ■Notes on the digital signal ■BGV (background video) function Input Modes and Indications ■Notes on playing a source encoded with a DTS signal Selecting a DSP Program ■On the remote control ■On the front panel ■Virtual CINEMA DSP and SILENT CINEMA off the effect speakers) TUNING Connecting the Antennas ■Connecting the indoor FM antenna ■Connecting the AM loop antenna 3 Automatic Tuning Manual Tuning Automatic Preset Tuning (for FM stations only) ■Automatic preset tuning options ■When automatic preset tuning is completed Manual Preset Tuning To Recall a Preset Station Exchanging Preset Stations RECORDING A SOURCE ■Special considerations when recording DTS software SET MENU Adjusting the Items on the SET MENU 1SPEAKER SET (speaker mode settings) ■CENTER SP (center speaker mode) ■MAIN SP (main speaker mode) ■REAR LR SP (rear speaker mode) ■BASS OUT (bass out mode) 2HP TONE CTRL (headphone tone control) 3 I/O ASSIGN ■3A (1) (for the OPTICAL OUTPUT jack) ■3B (2) to (4) (for the OPTICAL INPUT jacks) ■3C (5) (for the COAXIAL INPUT jack) 5 DOLBY D. SET (Dolby Digital set) ■LFE LEVEL ■D-RANGE(dynamic range) 6 DTS SET (DTS LFE level) 7 SP DLY TIME (center delay) 8DISPLAY SET ■DIMMER 9 MEM. GUARD (memory guard) DELAY TIME AND SPEAKER OUTPUT LEVELS Delay Time Sound Output Level of the Center Right Rear and Left Rear Speakers and Subwoofer Adjusting Method SLEEP TIMER Setting the SLEEP Timer Canceling the SLEEP Timer PRESET REMOTE CONTROL Component Selector Buttons Controlling the Components Connected to This Unit ■Example: To control YAMAHA CD player Description of Each Mode ■TAPE/MD MODE ■CD MODE ■DVD/LD MODE ■DVD MENU MODE ■ VCR MODE ■ CBL/SAT MODE ■TV MODE Setting the Manufacturer Code ■To use a second (and third) VCR Returning to the Factory Setting ■To return to the factory-setcodes in all modes ■To return to the factory-setcodes in each mode SOUND FIELD PROGRAM Hi-FiDSP Programs ■For audio sources: Nos. 1 to CINEMA DSP Programs ■For audio-videosources: Nos. 4 to ■For movie programs: Nos. 7 to ■MOVIE THEATER 1 and TROUBLESHOOTING ■ General Page Page ■Tuner ■Remote control SPECIFICATIONS (HTR-5450) SPECIFICATIONS (HTR-5440) GLOSSARY ■Dolby Surround ■Dolby Digital ■DTS (Digital Theater Systems) Digital Surround ■LFE 0.1 channel ■ S VIDEO signal HTR-5450only ■PCM (Linear PCM) ■Sampling frequency and number of quantized bits HTR-5450only ■I/O ASSIGN (SET MENU) INDEX LIST OF MANUFACTURER’S CODES LISTES DES CODES FABRICANT Page Page Page L Analog signal O Optical signal S Video signal Video signal Signal flow