■3C (5) (for the COAXIAL INPUT jack)
Initial setting: (5) CD
Note
•You cannot select an item more than once for the same type of jack.
■3A (1) and (2) (for the OPTICAL INPUT jacks)
Initial settings: (1) DVD
(2)
■3B (3) (for the COAXIAL INPUT jack)
Initial setting: (3) CD
Note
•You cannot select an item more than once for the same type of jack.
4 INPUT MODE (initial input mode)
Use this feature to designate the input mode when turning on the power of this unit with the source component connected to more than one type of input jacks.
Choices: AUTO, LAST
Initial setting: AUTO
SET MENU
5 DOLBY D. SET (Dolby Digital set)
This setting is effective only when this unit decodes Dolby Digital signals.
■LFE LEVEL
Use this feature to adjust the output level of the LFE (low- frequency effect) channel when playing back a Dolby Digital signal. The LFE signal carries the
Control value (dB):
Initial setting: 0 dB
dB
Notes
•Adjust the LFE level according to the capacity of your subwoofer.
•Normally, around
■D-RANGE (dynamic range)
Use this feature to adjust the dynamic range (the difference between the maximum level and the minimum level of sounds).
Choices: MAX, STD (standard), MIN
Initial setting: MAX
|
|
|
|
|
|
|
| ADVANCED | |
• Select MIN for listening to sources at an extremely low | ||||
• Select MAX for feature films. |
| |||
• Select STD for general use. | TIONOPERA | |||
| level | level | ||
volume level. | MAX |
| ||
|
|
| ||
|
| Dialog |
| |
| Output | Input level |
| |
| ||||
|
|
| ||
| STD | MIN |
| |
AUTO
Select this to allow this unit to automatically detect the type of input signal and select the appropriate input mode.
LAST
Select this to set this unit to automatically select the last input mode used for that source.
Output level
Note
|
| ||
level | 0.0 |
| level |
| |||
Dialog | 1.0 | Output | |
| |||
1.0 |
|
| |
0.0
Input level
Dialog level
Input level
English
•When you select MIN, the sound output may be faint because some Dolby Digital signals are not compatible with the
35