Advanced setup
This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.
Notes
•Only A STANDBY/ON, L PROGRAM l/ h, and
M STRAIGHT are effective while you are using the advanced setup menu.
•No other operations can be made while you are using the advanced setup menu.
•The advanced setup menu is only available in the front panel display.
1Press A STANDBY/ON to set this unit to the standby mode.
2Press and hold K TONE CONTROL and then press A STANDBY/ON to turn on this
unit.
This unit turns on, and the advanced setup menu appears in the front panel display.
3Press L PROGRAM l / h to select the parameter you want to adjust.
The name of the selected parameter appears in the front panel display.
4Press M STRAIGHT repeatedly to change the selected parameter setting.
5Press A STANDBY/ON to confirm your selection and set this unit to the standby mode.
y
The settings you made are reflected next time you turn on this unit.
■Speaker impedance SP IMP.
(U.S.A. and Canada models only)
Use this feature to set the speaker impedance of this unit so that it matches that of your speakers.
Choices: 8Ω MIN, 6Ω MIN
•Select “8Ω MIN” to set the speaker impedance to 8 Ω.
•Select “6Ω MIN” to set the speaker impedance to 6 Ω.
SP IMP. | Speaker | Impedance level |
|
|
|
| Front (A or B) |
|
|
| The impedance of each |
|
| |
8Ω MIN | Center | speaker must be 8 Ω or |
|
| higher. |
| Surround |
|
|
|
|
| Front (A or B) |
|
|
| The impedance of each |
|
| |
6Ω MIN | Center | speaker must be 6 Ω or |
|
| higher. |
| Surround |
|
|
|
|
■SIRIUS Satellite Radio Parental Lock
code number reset SSR PIN
Use this feature to set the code number for the SIRIUS Satellite Radio Parental Lock feature to the initial factory setting.
Choices: RESET, CANCEL
•Select “RESET” to set the code number to the initial factory setting.
•Select “CANCEL” to set the code number to the initial factory setting.
Note
Even if you set “SSR PIN” to “RESET”, this unit does not unlock the locked channels. The initial factory setting of the Parental Lock code number is “0000”.
