BCINEMA DSP indicator
Lights up when you select a CINEMA DSP sound field program (see page 39).
VIRTUAL indicator
Lights up when Virtual CINEMA DSP is active (see page 39).
SILENT CINEMA indicator
Lights up when headphones are connected and a sound field program is selected (see page 39).
C
Shows the name of the current sound field program and other information when adjusting or changing settings.
DSLEEP indicator
Lights up while the sleep timer is on (see page 37).
EInput channel and speaker indicators
LFE |
| LFE indicator |
|
L C R
Input channel indicators
SL SR
Input channel indicators
•Indicate the channel components of the current digital input signal.
•Light up or flash according to the settings of the speakers when this unit is in the automatic setup procedure (see page 24) or the speaker level setting procedure in the “SP LEVEL” (see page 65).
Connections
■Using the remote control
The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.
Approximately | 30º | 30º |
6 m (20 ft) |
|
|
1Infrared window
Outputs infrared control signals. Aim this window at the component you want to operate.
y
To set the remote control codes for other components, see page 75.
Notes
•Do not spill water or other liquids on the remote control.
•Do not drop the remote control.
•Do not leave or store the remote control in the following types of conditions:
–places of high humidity, such as near a bath
–places of high temperature, such as near a heater or stove
–places of extremely low temperatures
–dusty places
PREPARATION
English
