Yamaha RX-V1500 owner manual Remote control, Problem, Cause, Remedy, Refer to

TROUBLESHOOTING

■Remote control

Problem	Cause	Remedy	Refer to
			page
The remote control	Wrong distance or angle.	The remote control will function within a maximum	8
does not work nor		range of 6 m (20 ft) and no more than 30 degrees off-
function properly.		axis from the front panel.
	Direct sunlight or lighting (from an	Reposition this unit.	—
	inverter type of fluorescent lamp, etc.) is
	striking the remote control sensor of this
	unit.
	The batteries are weak.	Replace all batteries.	3
	AMP/SOURCE/TV is set incorrectly.	Set AMP/SOURCE/TV correctly.	—
		When operating this unit, set it to the AMP position.
		When operating the component selected by the input
		selector button, set it to the SOURCE position.
		When operating the TV set in the DTV or PHONO
		area, set it to the TV position.
	The remote control code was not correctly	Set the remote control code correctly.	69
	set.
		Try setting another code of the same manufacturer.	69
	Even if the remote control code is	Program the necessary functions independently into	71
	correctly set, there are some models that	the programmable buttons using the Learn feature.
	do not respond to the remote control.
The remote control	The batteries of this remote control and/or	Replace the batteries.	3
does not “learn” new	the other remote control are too weak.
functions.
	The distance between the two remote	Place the remote controls at the proper distance.	71
	controls is too much or too little.
	The signal coding or modulation of the	Learning is not possible.	—
	other remote control is not compatible
	with this remote control.
	Memory capacity is full.	Delete other unnecessary functions to make room for	76
		the new functions.

INFORMATION	ADDITIONAL
English

93