SPEAKER SETUP
5Tighten the knob to secure the wire.
5 |
Speaker terminal wrench
4 |
3 |
Red: positive (+)
Black: negative (–)
■ Connecting to PRESENCE/ZONE 2 or
PRESENCE speaker terminals
1 
3
2
1Open the tab.
2Insert one bare wire into the hole of each terminal.
3Return the tab to secure the wire.
■Banana plug connections
(With the exception of U.K., Europe and Asia models) First, tighten the knob and then insert the banana plug connector into the end of the corresponding terminal.
Banana plug
(With the exception of U.K., Europe and Asia models)
y
You can also use banana plugs with the PRESENCE/ZONE 2 and PRESENCE speaker terminals. Open the tab, then insert one banana plug connector into the hole of each terminal. Do not attempt to close the tabs after connecting the banana plugs.
14
