EON function, To cancel this function | Yamaha RX-V1500 guide

EON function

This function uses the EON data service on the RDS station network. If you select the desired program type (NEWS, INFO, AFFAIRS or SPORT), this unit automatically searches for all preset RDS stations that are scheduled to broadcast the selected type of program and switches from the station currently being received to the new station when the broadcast starts.

Note

This function can only be used when an RDS station that offers the EON data service is being received. When such a station is being received, the EON indicator lights up in the front panel display.

1Check that the EON indicator is lit on the front panel display.

If the EON indicator is not lit up, tune into another RDS station so that the EON indicator lights up.

2Press EON repeatedly to select the desired program type (NEWS, INFO, AFFAIRS or SPORT).

The selected program type name appears on the front panel display.

RDS MODE

/FREQ E O N

Front panel

or

EON

Remote control

•If a preset RDS station type starts broadcasting the selected type of program, the unit automatically switches from the program being received to that program. (EON indicator flashes.)

•When broadcasting of the selected program ends, the unit returns to the previous station (or another program on the same station).

■To cancel this function

Press EON repeatedly until no program type name is shown on the front panel display.

TUNING

OPERATION	BASIC

English

47

Image 49

Yamaha RX-V1500 owner manual EON function, To cancel this function

Contents

RX-V1500 Special Instructions for U.K. Model For U.K. customers Contents Built-in 7-channel power amplifier FeaturesSound field features Other features Installing batteries in the remote control Supplied accessoriesGetting Started Front panel Controls and Functions Opening and closing the front panel Door Europe models only Remote control Mute AMP/SOURCE/TVSET Menu Night Handling the remote control Using the remote controlApproximately 6 m 20 ft Front panel display LFE indicator 96/24 indicatorInput channel indicators Presence and surround back speaker indicators AC Outlets Rear panelVoltage Selector Speaker placement Speaker Setup Di-pole speaker layout Speaker connections10 mm 3/8 Tighten the knob to secure the wire Connecting to PRESENCE/ZONE 2 or Presence speaker terminalsBanana plug connections Speaker terminal wrench Red positive + Black negative SUB Woofer Center terminals Front terminalsSurround terminals Subwoofer jack Cable indications ConnectionsAnalog jacks Digital jacks Connections for DVD playback Connecting video componentsDVD player A. model Video Monitor For 6-channel input Connecting to the Multi CH Input jacksMulti-format player External decoder Video AUX jacks on the front panel Connections for other video componentsUse these jacks to connect any video source, such as Game console or camcorder, to this unit Connecting a turntable Connecting audio componentsConnections for audio components Connecting to an external amplifier Connecting the AM loop antenna Connecting the antennasFrequency Step switch Asia and General models only 75-ohm/300-ohm antenna adapter U.K. model only Other models Connecting the power supply cordAsia and General models only Memory back-up Turning on the power Speaker impedance settingPress STANDBY/ON to exit the setting SP IMP . SET Optimizer microphone setup Auto SetupIntroduction Automenu Starting the setupSET Menu If you selected Step in step If you selected Auto in stepIf you selected Reload in step Press n to select Start Push i, then press h Before auto setup Troubleshooting for auto setup procedureDuring auto setup 1OUT of Phase After auto setup3LEVEL Error 4SWFR Phase Using Basic Menu Basic SetupBasic Menu 1/2 Press n to select SWFR, then press l / h to select Bspeaker Level Basic Menu 2/2Press n to select Check OK?, then press l / h to select Memory back-up Playback Adjust the volume to the desired output levelBasic operations Select the input source Rotate Program to select the desired program Front panel operationProgram name To adjust the tone Remote control operationTo listen with headphones Additional operations Enjoying multi-channel software 7.1 channel surround Selecting the Multi CH InputAuto Auto Decoders select with l / h To cancel, press Pure Direct again Press Standard on the remote control to select the decoderEnjoying 2-channel software in surround Listening to high fidelity stereo sound With Pure Direct Listening to high fidelity stereo sound With Direct Stereo This adjusts the level of compressionNight listening modes Front panel display automatically dims Downmixing to 2 channels Listening to unprocessed input signalsVirtual Cinema DSP Playing video sources Background Displaying information about the input Source Selecting input modesDTS Analog Automatic and manual tuning TuningAutomatic tuning Manual tuning Automatically presetting FM stations Presetting stationsAutomatic preset tuning options Press FM/AM to select the FM band Tune into a station Manually presetting stationsPress Memory MAN’L/AUTO FM Repeat steps 1 through 5 to store other stations Exchanging preset stations Selecting preset stationsPress and hold PRESET/TUNING Edit for more than 3 seconds Press PRESET/TUNING Edit again Receiving RDS stations Changing the RDS mode To exit from the PTY Seek mode, press PTY Seek Mode again Press PTY Seek Mode to set this unit in the PTY Seek modePTY Seek function Selected program type appears on the front panel display EON function To cancel this function Recording Special considerations when recording DTS software For movie/video sources Sound Field Program Descriptions SUR. Standard Dolby Digital Dolby DigitalSUR. Enhanced SUR. Standard SUR. Standard PRO Logic PRO Logic Concert Hall For music sourcesJazz Club Rock Concert Setting the sleep timer Selecting the OSD mode Using the sleep timerAdvanced Operations Press l / h to adjust the speaker output level Canceling the sleep timerControl range is from +10 dB to -10 dB Set AMP/SOURCE/TV to AMP Press Test Using the test tone Basic Menu SET MenuSound Menu Input Menu Option Menu Using SET Menu Sound Menu 1/3 Using Sound MenuCenter SP Front SP LFE/BASS OUT Surr B L/R SPSurround left/right speakers Surr L/R SP Presence speakers Surround back speakers Surr B L/R SP CSP Distance Cross OverSpeaker distance CSP Distance Dgraphic EQ Graphic EQElfe Level Fdynamic Range HHP Tone Ctrl Glow FRQ.TESTIaudio SET Low frequency test Glow FRQ. Test Input Menu Using Input MenuCMPNT-V Input Optical OUT Optical Binput ModeCinput Rename Coaxial Dmulti CH Input Using Option MenuOption MENU1/2 Adisplay SET Bmemory Guard Speaker impedance settingCPARAM. INI DSP IMP.SET FZONE2 SET Ezone SETGZONE3 SET Zone 2 set FZONE2 SET Control area Remote Control FeaturesControlling this unit Controlling other components Remote Control Code Default Settings Setting remote control codesControlling optional components Optn area Set AMP/SOURCE/TV to Source Press Enter Press Learn again to exit from the setup modePress Enter to set the number Function To 10 cm 2 to 4 Press an input selector button to select a source component Press Learn again to exit the learning mode Press Learn using a ballpoint pen or similar objectLearn appears in the display window Display window Changing source names Press a macro button Using the Macro featureMacro buttons First Second Third Macro operations Press Macro using a ballpoint pen or similar objectProgramming macro operations Set Macro ON/OFF to on Press a macro button Press k / n to select the clear mode Press Clear by using a ballpoint pen or similar objectClearing function sets Clear appears in the display window Clearing individual functions Press Clear to exit from the clearing modeClearing a learned function Clearing a macro function Press Clear to exit the clearing modePress Learn again to exit Press Macro again to exit VCR Controlling each component Using external amplifiers System configuration and connection exampleZone 2/ZONE Zone 2/Zone 3 connections Using this unit’s internal amplifier To enable Zone mode on the remote ControlPress Learn to complete the Zone setup To control Zone 2/Zone Turning this unit to either on or standby Press Select k/n to exit from the Zone Zone 3 modeSpecial considerations for DTS software For DVDs encoded with DTS Changing parameter settings What is a sound field?Editing Sound Field Parameters Elements of a sound field To reset a certain parameter Resetting parameters to the factory valuesTo reset all parameters Press k / n to select Parameters Sound Field Parameter Descriptions INIT. DLY/P. INIT. DLY Initial delayRoom SIZE/P. Room Size Room size SB INI. DLY Surround back initial delay INIT. DLY Surround initial delayRoom Size Surround room size Liveness Surround liveness REV.TIME Reverberation time REV.DELAY Reverberation delayREV. Level Reverberation level For 7ch Stereo DIALG.LIFT Dialog liftFor DTS Neo6 Music Image Center image For THX Cinema DEC 2ch Decoder Select General Troubleshooting Goes off Sound suddenlyOnly the speaker on One side can be Volume level is Or DTS indicatorRecord Volume level Dolby Digital or DTS Tuner Does not work nor Remote controlFunction properly Does not learn new Audio formats Glossary PCM Linear PCM Sound field programs LFE 0.1 channel Audio informationSampling frequency and number Quantized bits THX Cinema processing Video signal information Specifications