Yamaha RX-V1500 Clearing function sets, 1Set AMP/SOURCE/TV to AMP or SOURCE, Memory back-up

REMOTE CONTROL FEATURES

4Press the buttons for the functions you want to include in the macro operation in sequence.

You can set up to 10 steps (10 functions). After you have set 10 steps, “FULL” appears and the remote control automatically exits the macro mode.

Clearing function sets

You can clear all changes made in each function set, such as learned functions, renamed source names and setup remote control codes.

1Set AMP/SOURCE/TV to AMP or SOURCE.

SYSTEM

POWER POWER STANDBY POWER

TV	AV
	2

A	B	INPUT MODE	SLEEP
PHONO	TUNER	CD	MULTI CH IN
V-AUX	CBL/SAT	MD/TAPE	CD-R
DTV	VCR 1	DVR/VCR2	DVD

1

MCR 2: AV POWER

MCR 1: DVD

AMP

SOURCE

TV

2Press CLEAR by using a ballpoint pen or similar object.

“CLEAR” appears in the display window.

FREQ/RDS	EON	MODE	PTY SEEK START
REC
DISC SKIP			3	MCR 3: h
OFF ON	MACRO	LEARN	CLEAR RE–NAME

CLEAR

Note

Indicates the number of macro steps entered

Flashes alternately so you can set the next step

Note

To change the selected source component, press SELECT k/n. Pressing the input selector buttons will program a macro step, whereas SELECT k/n only changes the selected component and corresponding component control area.

5Press MACRO again when the operation sequence you want to program is complete.

If you do not complete each of the following steps within 30 seconds, the clearing mode will be automatically canceled. In this case, press CLEAR again.

3Press k / n to select the clear mode.

L:DVD	(L: name of a component)
	Clears all learned functions in the respective
	component control area. Press an input selector
	button to select the component.
L:AMP	Clears all learned functions for this unit’s control
	area.
L:ALL	Clears all learned functions.
M:ALL	Clears all programmed macros.
RNAME	Clears all renamed source names.
FCTRY	Clears all remote functions and returns the remote
	to the factory settings.

4Press and hold CLEAR again for about 3 seconds.

“WAIT” appears in the display window. If clearing was successful, “C:OK” appears in the display

window.

Note

CLEAR

“ERROR” appears in the display window if you press a button not indicated in the respective step, or if you press more than one button simultaneously.

Memory back-up

If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. If the memory is cleared, insert new batteries, set up the remote control code(s) and program any acquired functions that may have been cleared.

y

Once you have cleared a learned function for a button, the button reverts to the factory setting (or to the manufacturer setting, if you have set remote control codes).

Note

“L:ALL” and “FCTRY” may take about 30 seconds to complete.

76