Yamaha RX-V1500 Connecting the power supply cord, Connecting the AC power cord, Other models

CONNECTIONS

Connecting the power supply cord

AC OUTLETS

(U.S.A. model)

VOLTAGE SELECTOR

	VOLTAGE
2	SELECTOR

■Connecting the AC power cord

(U.S.A., Canada, U.K., Europe, Australia,

China and Korea models)

Plug the power cord into the AC inlet after all other connections are complete, then plug the power cord to an AC wall outlet.

CAUTION

Do not use other AC power cords. Use the one provided. Use of other power cords may result in fire hazard or electrical shock.

(Other models)

Plug the power cord into an AC wall outlet.

■AC OUTLET(S) (SWITCHED)

U.K. and Australia models	.............................. 1 OUTLET
Korea model	None
Other models	2 OUTLETS

Use these outlets to connect the power cords from your other components to this unit. Power to the AC OUTLET(S) is controlled by this unit’s STANDBY/ON (or SYSTEM POWER and STANDBY). These outlets will supply power to any connected component whenever this unit is turned on. The maximum power (total power consumption of components) that can be connected to the AC OUTLET(S) is:

Asia and General models	.......................................... 50 W
Other models	100 W

■VOLTAGE SELECTOR

(Asia and General models only)

The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply.

Voltages are:

General model	AC 110/120/220/230-240 V,	50/60 Hz
Asia model	AC 220/230-240V,	50/60 Hz

	■ Memory back-up
	The memory back-up circuit prevents the stored data from
	being lost even if this unit is in the standby mode.
	However if the power cord is disconnected from the AC
	wall outlet, or the power supply is cut for more than one
(General model)
	week, the stored data will be lost.

24