Yamaha RX-V1500 owner manual Basic Menu 2/2, Bspeaker Level, Memory back-up

BASIC SETUP

7Press n to select SPEAKERS, then press l / h to select the number of speakers connected to the unit.

The choices vary as follows depending on the PRESENCE setting:

Choices			PRESENCE setting
			YES		NONE
				L C R	Front L/R
2		—	—
				SL SB SR
				L C R	Front L/R,
3		—	—		Center
				SL SB SR
	L	R	Presence L/R,	L C R	Front L/R,
4			Front L/R		Surround L/R
				SL SB SR
	L C R		Presence L/R,	L C R	Front L/R,
5			Front L/R,		Center,
				SL SB SR
			Center		Surround L/R
	L	R	Presence L/R,	L C R	Front L/R,
			Front L/R,		Center,
6	SL	SR		SL SB SR
			Surround L/R		Surround L/R,
					Surround back
	L C R		Presence L/R,	L C R	Front L/R,
			Front L/R,		Center,
	SL	SR		SL SB SR
7			Center,		Surround L/R,
			Surround L/R		Surround back
					L/R
	L C R		Presence L/R,
			Front L/R,
	SL	SB SR
8			Center,	—	—
			Surround L/R,
			Surround back*
	L C R		Presence L/R,
			Front L/R,
	SL	SB SR
			Center,
9				—	—
			Surround L/R,
			Surround back
			L/R*

*Surround back and presence speakers do not output sound simultaneously. You can set to prioritize either set of speakers in SOUND MENU (see page 63).

8After you have finished the settings, press n, then press l / h to select:

SET	To apply the changes.
CANCEL	To cancel the setup.

1 BASIC MENU 2/2

. [SET CANCEL ROOM SIZE=MEDIUM

9Press n to select CHECK OK?, then press l / h to select:

YES To exit the setup if the test tones were satisfactory.

NO To adjust each speaker level (see page 60).

1 BASIC MENU 2/2

. CHECK OK?;;;;YES

(when “NO” is selected)

B)SPEAKER LEVEL

-+

. FR

C SL

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However, if the power cord is disconnected from the AC outlet, or the power supply is cut for more than one week, the stored data will be lost. If so, adjust the items again.

If you select “SET”, you will hear a test tone from each speaker.

32