Yamaha RX-V1500 owner manual Turning this unit to either on or standby, Zone 3 mode, Notes

ZONE 2/ZONE 3 (U.S.A., CANADA, U.K., EUROPE AND AUSTRALIA MODELS ONLY)

4You can control the unit from Zone 2 or Zone 3 by using the input selector, STANDBY, SYSTEM POWER, MUTE and VOLUME +/– buttons.

			SYSTEM
POWER	POWER	STANDBY	POWER
TV	AV						SELECT
A	B	INPUT MODE	SLEEP
				+	+	+	AMP
PHONO	TUNER	CD	MULTI CH IN
							SOURCE
				TV VOL	CH	VOL
								*
V-AUX	CBL/SAT	MD/TAPE	CD-R	–	–	–	TV
					A / B / C / D / E
DTV	VCR 1	DVR/VCR2	DVD	TV MUTE	TV INPUT	MUTE
				LEVEL		SET MENU	PURE DIRECT

TITLEMENU

*VOLUME +/– can be used only when OUTPUT VOL is set to VAR. in SET MENU (see page 67).

5Press SELECT k/n to exit from the Zone 2/

Zone 3 mode.

Notes

•The source in Zone 2 and the source available for recording are always the same.

•“ZONE2” or “ZONE3” will appear in the display window only when k is pressed, and “SYSTM” only when n is pressed.

■Turning this unit to either on or standby

SYSTEM POWER and STANDBY work differently depending on the selected mode that appears on the display window.

• When normal, Zone 2 or Zone 3 mode is selected, you can turn the main unit, Zone 2 or Zone 3 to on/standby individually.

• When System mode is selected, or when “AMP1” is selected as the amplifier library (L:AMP) code, you can turn the main unit, Zone 2 and Zone 3 to on/ standby simultaneously.

	LCD display	SYSTEM POWER/
		STANDBY
Normal mode*	Name of component	Turns the main unit
		on/standby
Zone 2 mode	“ZONE2” or “2:name	Turns Zone 2 to on/
	of component”	standby
Zone 3 mode	“ZONE3” or “3:name	Turns Zone 3 to on/
	of component”	standby
System mode		Turns everything (the
	“SYSTM”	main unit, Zone 2,
		Zone 3) on/standby

*“MAIN” appears for a few seconds when SYSTEM POWER or STANDBY is pressed.

■Special considerations for DTS software

The DTS signal is a digital bitstream. If you attempt to send the DTS signal to the second/third room you will only hear digital noise (that may damage your speakers). Thus, the following considerations and adjustments need to be made when playing DTS encoded discs.

For DVDs encoded with DTS

Only 2 channel analog audio signals may be sent to the second/third room.

Use the disc menu to set the DVD player’s mixed 2- channel left and right audio outputs to the PCM or Dolby Digital soundtrack.

For CDs encoded in DTS

To avoid unexpected noise, DO NOT USE the Zone 2/ Zone 3 feature with CDs encoded in DTS.

82