Yamaha RX-V1500 Ezone Set, Zone 2 set FZONE2 SET, Zone 3 set GZONE3 SET, Notes

■Zone set E)ZONE SET

E)ZONE SET

SP B;;;;;;MAIN

p/p :	Exit
</> :	Main

Speakers B SP B

Use to specify the location of speakers connected the SPEAKERS B terminals.

Choices: MAIN, ZONE B

•Select “MAIN” to turn on/off SPEAKERS A and B when the speakers connected to the SPEAKERS B terminals are set in the main room.

•Select “ZONE B” if the speakers connected to the SPEAKERS B terminals are set in another room. If SPEAKERS A is turned OFF and SPEAKERS B is turned ON, all the speakers including the subwoofer in the main room are muted and the unit outputs sound from SPEAKERS B only.

Notes

•If you select “ZONE B” and connect headphones to the PHONES jack on the unit, the sound is output from both headphones and SPEAKERS B.

•When a DSP program is selected, the unit automatically enters the Virtual CINEMA DSP mode.

■Zone 2 set F)ZONE2 SET

(U.S.A., Canada, U.K., Europe and Australia models only)

F)ZONE2 SET

OUTPUT VOL;;VAR.

ZONE2 AMP....OFF

p/p : Up/Down

</> : Select

SET MENU

Zone 2 amplifier ZONE2 AMP

Use to select how the ZONE 2 speakers will be amplified. Choices: ON, OFF

•Select “OFF” if you do not use Zone 2 speakers or if you connect your Zone 2 speakers through an external amplifier connected to this unit’s ZONE 2 OUTPUT jacks.

•Select “ON” to use this unit’s internal amplifier if you connect your Zone 2 speakers directly to this unit’s PRESENCE/ZONE 2 speaker terminals.

■Zone 3 set G)ZONE3 SET

(U.S.A., Canada, U.K., Europe and Australia models only)

G)ZONE3 SET

OUTPUT VOL;;VAR.

p/p :	Exit
</> :	Select

Output volume OUTPUT VOL

Use to select how the volume control will operate with regard to the ZONE 3 OUT jacks.

Choices: VAR., FIX

•Select “VAR.” to adjust the ZONE 3 OUT volume simultaneously with VOL –/+ on the remote control.

•Select “FIX” to fix the ZONE 3 OUT volume level to a

standard line level.

Output volume OUTPUT VOL

Use to select how the volume control will operate with regard to the ZONE 2 OUTPUT jacks.

Choices: VAR., FIX

•Select “VAR.” to adjust the ZONE 2 OUTPUT volume simultaneously with VOL –/+ on the remote control.

•Select “FIX” to fix the ZONE 2 OUTPUT volume level to a standard line level.

English

67