Yamaha RX-V1500 owner manual Set Menu, Auto Setup, Manual Setup

SET MENU

You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.

■AUTO SETUP

Use to specify which speaker parameters auto setup will adjust, and to activate the auto setup procedure (see page 26).

■MANUAL SETUP

Use to manually adjust speaker and system settings.

BASIC MENU

Use to quickly setup basic system parameters (see page 31).

SOUND MENU

Use to manually adjust any speaker setting, alter the quality and tone of the sound output by the system or compensate for video signal processing delays when using LCD monitors or projectors.

y

Most of the parameters described in SOUND MENU are set automatically when you run auto setup (see page 26). You can use SOUND MENU to make further adjustments, but we recommend running auto setup first.

Item	Features	Page
A)SPEAKER SET	Selects the size of each speaker, the speakers for low-frequency signal output, and the cross over	58
	frequency.
B)SPEAKER LEVEL	Adjusts the output level of each speaker.	60
C)SP DISTANCE	Adjusts the delay time of each speaker.	60
D)GRAPHIC EQ	Adjusts the tonal quality of each speaker.	61
E)LFE LEVEL	Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.	61
F)DYNAMIC RANGE	Adjusts the dynamic range for Dolby Digital or DTS signals.	61
G)LOW FRQ. TEST	Matches the subwoofer level with the level of the other speakers.	62
H)HP TONE CTRL	Adjusts the tonal balance of the headphones.	62
I)AUDIO SET	Customizes overall audio settings of this unit.	62
J)PR/SBch SELECT	Selects priority to either surround back or presence speakers when both sets of speakers are	63
	connected to this unit.

INPUT MENU

Use to reassign digital input/outputs, select the input mode, rename your inputs, or specify external input settings.

Item	Features	Page
A)I/O ASSIGNMENT	Assigns jacks according to the component to be used.	63
B)INPUT MODE	Selects the initial input mode of the source.	64
C)INPUT RENAME	Changes the name of the inputs.	64
D)MULTI CH INPUT	Sets the direction of the signals input into the center, subwoofer and surround channels for the	65
	source component connected to the MULTI CH INPUT jacks.

56