■Graphic equalizer D)GRAPHIC EQ
Use this feature to select parametric (PEQ) or graphic equalizer (GEQ).
Equalizer select EQ SELECT
Choices: PEQ, GEQ
D) GRAPHIC EQ
. EQ SELECT....PEQ
p/p : Up/Down
</> : Select
• Select “PEQ” to use the equalizer adjusted in auto setup.
• Select “GEQ” to adjust the
Equalizer
Use to match the tonal quality of the center, surround L/R and surround back L/R speakers with that of the front L/R speakers.
Choices:
D)GRAPHIC EQ
. CHANNEL;;FRONT L
- | + |
63Hz | 0dB |
160Hz | 0dB |
400Hz | 0dB |
1kHz | 0dB |
2.5kHz | 0dB |
6.3kHz | 0dB |
16kHz | 0dB |
You can adjust 7 frequency bands: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz, 16kHz
■Low-frequency effect level E)LFE LEVEL
Use to adjust the output level of the LFE
Choices:
E)LFE LEVEL
. SPEAKER;;;;;;0dB
HEADPHONE;;;;0dB
p/p : | Up/Down |
</> : | Adjust |
SET MENU
■Dynamic range F)DYNAMIC RANGE
Use to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when the unit is decoding Dolby Digital and DTS signals.
Choices: MIN (minimum), STD (standard), MAX (maximum)
F)DYNAMIC RANGE
. SP: MIN STD[MAX HP: MIN STD[MAX
p/p | : | Up/Down |
</> | : | Select |
Speaker SP
Select to adjust the speaker compression.
Headphone HP
Select to adjust the headphone compression.
•Select “MIN” if you regularly listen at low volume levels.
•Select “STD” for general use.
•Select “MAX” to preserve the greatest amount of
dynamic range.
OPERATION | ADVANCED |
|
|
Speaker SPEAKER
Select to adjust the speaker LFE level.
Headphone HEADPHONE
Select to adjust the headphone LFE level.
Note
Depending on the settings of LFE LEVEL, some signals may not be output from the SUBWOOFER PRE OUT jack.
English
61