Yamaha RX-V1500 Cross Over, Csp Distance, Speaker distance CSP DISTANCE, Bspeaker Level

SET MENU

Cross over CROSS OVER

Use this feature to select a cross-over (cut-off) frequency for all low-frequency signals. All frequencies below the selected frequency will be sent to the subwoofer. Choices: 40Hz, 60Hz, 80Hz (THX), 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz

THX recommendation: 80Hz

CROSS OVER

FREQ;;;80Hz(THX)

■Speaker level B)SPEAKER LEVEL

Use these settings to manually balance the speaker levels between the front left (or surround left) speaker and each speaker selected in SPEAKER SET (page 58).

Choices: –10.0 dB to +10.0 dB

B)SPEAKER LEVEL

-+

. FR

C SL

•FR adjusts the balance of the front left and front right speakers.

•C adjusts the balance of the front left and center speakers.

•SL adjusts the balance of the front left and surround left speakers.

•SBL* adjusts the balance of the surround left and surround back left speakers.

•SBR* adjusts the balance of the surround left and surround back right speakers.

•SR adjusts the balance of the surround left and surround right speakers.

•SWFR adjusts the balance of the front left speaker and subwoofer.

•PRES adjusts the balance of the front and presence speakers.

*SB will be displayed if you selected only one surround back speaker in SURR B L/R SP (page 59).

y

If you use a handheld SPL meter, hold at arms length and point upwards so that the meter is in the listening position. With the meter set to the 70 dB scale and to C SLOW, calibrate each speaker to 75 dB.

■Speaker distance C)SP DISTANCE

Use this feature to manually input the distance of each speaker and adjust the delay applied to respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sounds arrive at the listening position at the same time.

C)SP DISTANCE

. UNIT;;;;;;meters

FRONT ;;;;3.00m

FRONT ;;;;3.00m

CENTER;;;;;3.00m

p/p	:	Up/Down
</>	:	Adjust

Unit UNIT

Choices: meters (m), feet (ft)

Initial setting:

U.S.A. and Canada models: feet (ft)

Other models: meters (m)

•Select “meters” to input speaker distances in meters.

•Select “feet” to input speaker distances in feet.

Speaker distances

Choices: 0.3 to 24.00 m (1 to 80 ft)

•FRONT L adjusts the distance of the front left speaker. Initial setting: 3.0 m (10.0 ft)

•FRONT R adjusts the distance of the front right speaker. Initial setting: 3.0 m (10.0 ft)

•CENTER adjusts the distance of the center speaker. Initial setting: 3.0 m (10.0 ft)

•SURR L adjusts the distance of the surround left speaker. Initial setting: 3.0 m (10.0 ft)

•SURR R adjusts the distance of the surround right speaker. Initial setting: 3.0 m (10.0 ft)

•SB L* adjusts the distance of the surround back left speaker. Initial setting: 2.10 m (7.0 ft)

•SB R* adjusts the distance of the surround back right speaker. Initial setting: 2.10 m (7.0 ft)

•SWFR adjusts the distance of the subwoofer. Initial setting: 3.0 m (10.0 ft)

•PRES L adjusts the distance of the presence left speaker. Initial setting: 3.0 m (10.0 ft)

•PRES R adjusts the distance of the presence right speaker. Initial setting: 3.0 m (10.0 ft)

*“SURR B” will be displayed if you selected only one surround

back speaker in SURR B L/R SP (page 59).

60