Yamaha RX-V1500 owner manual Remote controlling Zone 2/Zone, To control Zone 2/Zone

ZONE 2/ZONE 3 (U.S.A., CANADA, U.K., EUROPE AND AUSTRALIA MODELS ONLY)

Using this unit’s internal amplifier

To use this unit’s internal amplifier, set ZONE2 AMP to ON in SET MENU (see page 67).

R L

+

–

PRESENCE/ ZONE 2

This unit

Remote controlling Zone 2/Zone 3

The supplied remote control can be used to control Zone 2/Zone 3. You can even select the input source and control components located in the main room directly from the second/third room regardless of the listening condition in the main room.

Second room

■To control Zone 2/Zone 3

1Press SELECT k repeatedly to display “ZONE 2” or “ZONE 3” in the display window.

SELECT

■To enable Zone mode on the remote

control

You will be able to switch the remote control mode from one room to another, and use the input selector, STANDBY, SYSTEM POWER, MUTE and VOLUME +/

– to control the selected room.

1Repeat steps 1 through 3 of the procedure in “Setting remote control codes” on page 69.

2Press l / h to select “L:AMP”.

ENTER

or

2Press SYSTEM POWER to turn Zone 2 or Zone 3 power on.

3Press an input selector button to select the input source you want to listen to in the second/third room.

The display window shows “2: name of selected

input” or “3: name of selected input” if the remote control is in the Zone 2/Zone 3 mode.

3Press ENTER.

“2000” appears in the display window.

4Enter the code number “2001”.

5Press ENTER to set the number.

“OK” appears in the display window if setting was successful.

6Press LEARN to complete the Zone setup.

The remote control will be able to operate this unit from Zone 2 or Zone 3.

A	B	INPUT MODE	SLEEP
PHONO	TUNER	CD	MULTI CH IN
V-AUX	CBL/SAT	MD/TAPE	CD-R
DTV	VCR 1	DVR/VCR2	DVD

Note

Signals input to V-AUX and PHONO jacks cannot be sent to Zone 2/Zone 3.

LEARN

English

81