Setting remote control codes | Yamaha RX-V1500 instruction

■Controlling optional components

(OPTN area)

OPTN is an additional component control area that can be programmed with remote control functions independently from any input source. This area is useful for programming commands that are to be used only as a part of a macro function or for components that do not have a valid remote control code.

To select the OPTN control area, press n repeatedly until OPTN appears in the display window.

Notes

•You cannot set a remote control code for this area. See page 71 to program buttons operated within this component control area.

•The OPTN area cannot be used when AMP1Z is selected in the amplifier library (see page 70).

REMOTE CONTROL FEATURES

Setting remote control codes

You can control other components by setting the appropriate remote control codes. Codes can be set up for each input area.

The following table shows the default component (Library: component category) and the remote control code for each input area.

Remote Control Code Default Settings

		Library	Default YAMAHA
	Input area	(Component	Default YAMAHA
	Input area	(Component	code*
		category)	code*
		category)

	A	LD	2200

	B	TAPE	2700, (2701)

	PHONO	TV	–

	TUNER	TUNER	2600, (0203, 1203,
	TUNER	TUNER	1358, 2601)
			1358, 2601)

	CD	CD	2300, (2301)

	MULTI CH	DVD	2102, (0517, 0566,
	INPUT	DVD	0572, 2100, 2101)
	INPUT		0572, 2100, 2101)

	V-AUX	VCR	–

	CBL/SAT	CABLE	–

	MD/TAPE	MD	2500, (2501, 2502)

	CD-R	CD-R	2400

	DTV	TV	–

	VCR 1	VCR	–

	DVR/VCR2	DVR	2807

	DVD	DVD	2102, (0517, 0566,
	DVD	DVD	0572, 2100, 2101)
			0572, 2100, 2101)

*Additional YAMAHA codes available are given in parentheses.

Note

You may not be able to operate your YAMAHA component even if a YAMAHA remote control code is preset as listed above. In this case, try setting another YAMAHA remote control code.

1Set AMP/SOURCE/TV to SOURCE.

AMP

SOURCE

TV

OPERATION	ADVANCED

English

69

Image 71

Yamaha RX-V1500 Setting remote control codes, Controlling optional components Optn area, Set AMP/SOURCE/TV to Source

Contents

RX-V1500 Special Instructions for U.K. Model For U.K. customers Contents Other features FeaturesBuilt-in 7-channel power amplifier Sound field features Getting Started Supplied accessoriesInstalling batteries in the remote control Front panel Controls and Functions Opening and closing the front panel Door Europe models only Remote control Night AMP/SOURCE/TVMute SET Menu Approximately 6 m 20 ft Using the remote controlHandling the remote control Front panel display Presence and surround back speaker indicators 96/24 indicatorLFE indicator Input channel indicators Voltage Selector Rear panelAC Outlets Speaker placement Speaker Setup 10 mm 3/8 Speaker connectionsDi-pole speaker layout Speaker terminal wrench Red positive + Black negative Connecting to PRESENCE/ZONE 2 or Presence speaker terminalsTighten the knob to secure the wire Banana plug connections SUB Woofer Subwoofer jack Front terminalsCenter terminals Surround terminals Digital jacks ConnectionsCable indications Analog jacks A. model Video Monitor Connecting video componentsConnections for DVD playback DVD player Multi-format player External decoder Connecting to the Multi CH Input jacksFor 6-channel input Game console or camcorder, to this unit Connections for other video componentsVideo AUX jacks on the front panel Use these jacks to connect any video source, such as Connections for audio components Connecting audio componentsConnecting a turntable Connecting to an external amplifier 75-ohm/300-ohm antenna adapter U.K. model only Connecting the antennasConnecting the AM loop antenna Frequency Step switch Asia and General models only Memory back-up Connecting the power supply cordOther models Asia and General models only SP IMP . SET Speaker impedance settingTurning on the power Press STANDBY/ON to exit the setting Introduction Auto SetupOptimizer microphone setup SET Menu Starting the setupAutomenu Press n to select Start Push i, then press h If you selected Auto in stepIf you selected Step in step If you selected Reload in step During auto setup Troubleshooting for auto setup procedureBefore auto setup 4SWFR Phase After auto setup1OUT of Phase 3LEVEL Error Press n to select SWFR, then press l / h to select Basic SetupUsing Basic Menu Basic Menu 1/2 Memory back-up Basic Menu 2/2Bspeaker Level Press n to select Check OK?, then press l / h to select Select the input source Adjust the volume to the desired output levelPlayback Basic operations Program name Front panel operationRotate Program to select the desired program Additional operations Remote control operationTo adjust the tone To listen with headphones Decoders select with l / h Selecting the Multi CH InputEnjoying multi-channel software 7.1 channel surround Auto Auto Listening to high fidelity stereo sound With Pure Direct Press Standard on the remote control to select the decoderTo cancel, press Pure Direct again Enjoying 2-channel software in surround Front panel display automatically dims This adjusts the level of compressionListening to high fidelity stereo sound With Direct Stereo Night listening modes Playing video sources Background Listening to unprocessed input signalsDownmixing to 2 channels Virtual Cinema DSP Analog Selecting input modesDisplaying information about the input Source DTS Manual tuning TuningAutomatic and manual tuning Automatic tuning Press FM/AM to select the FM band Presetting stationsAutomatically presetting FM stations Automatic preset tuning options Repeat steps 1 through 5 to store other stations Manually presetting stationsTune into a station Press Memory MAN’L/AUTO FM Press PRESET/TUNING Edit again Selecting preset stationsExchanging preset stations Press and hold PRESET/TUNING Edit for more than 3 seconds Receiving RDS stations Changing the RDS mode Selected program type appears on the front panel display Press PTY Seek Mode to set this unit in the PTY Seek modeTo exit from the PTY Seek mode, press PTY Seek Mode again PTY Seek function EON function To cancel this function Recording Special considerations when recording DTS software For movie/video sources Sound Field Program Descriptions SUR. Standard Dolby DigitalSUR. Standard Dolby Digital SUR. Enhanced SUR. Standard PRO Logic PRO Logic Rock Concert For music sourcesConcert Hall Jazz Club Advanced Operations Selecting the OSD mode Using the sleep timerSetting the sleep timer Control range is from +10 dB to -10 dB Canceling the sleep timerPress l / h to adjust the speaker output level Set AMP/SOURCE/TV to AMP Press Test Using the test tone Input Menu SET MenuBasic Menu Sound Menu Option Menu Using SET Menu Front SP Using Sound MenuSound Menu 1/3 Center SP Surround back speakers Surr B L/R SP Surr B L/R SPLFE/BASS OUT Surround left/right speakers Surr L/R SP Presence speakers Speaker distance CSP Distance Cross OverCSP Distance Fdynamic Range Graphic EQDgraphic EQ Elfe Level Low frequency test Glow FRQ. Test Glow FRQ.TESTHHP Tone Ctrl Iaudio SET Optical OUT Using Input MenuInput Menu CMPNT-V Input Coaxial Binput ModeOptical Cinput Rename Adisplay SET Using Option MenuDmulti CH Input Option MENU1/2 DSP IMP.SET Speaker impedance settingBmemory Guard CPARAM. INI Zone 2 set FZONE2 SET Ezone SETFZONE2 SET GZONE3 SET Controlling other components Remote Control FeaturesControl area Controlling this unit Set AMP/SOURCE/TV to Source Setting remote control codesRemote Control Code Default Settings Controlling optional components Optn area Function Press Learn again to exit from the setup modePress Enter Press Enter to set the number To 10 cm 2 to 4 Press an input selector button to select a source component Learn appears in the display window Press Learn using a ballpoint pen or similar objectPress Learn again to exit the learning mode Display window Changing source names Macro buttons First Second Third Using the Macro featurePress a macro button Set Macro ON/OFF to on Press a macro button Press Macro using a ballpoint pen or similar objectMacro operations Programming macro operations Clear appears in the display window Press Clear by using a ballpoint pen or similar objectPress k / n to select the clear mode Clearing function sets Clearing a learned function Press Clear to exit from the clearing modeClearing individual functions Press Macro again to exit Press Clear to exit the clearing modeClearing a macro function Press Learn again to exit VCR Controlling each component Zone 2/Zone 3 connections System configuration and connection exampleUsing external amplifiers Zone 2/ZONE To control Zone 2/Zone To enable Zone mode on the remote ControlUsing this unit’s internal amplifier Press Learn to complete the Zone setup For DVDs encoded with DTS Press Select k/n to exit from the Zone Zone 3 modeTurning this unit to either on or standby Special considerations for DTS software Elements of a sound field What is a sound field?Changing parameter settings Editing Sound Field Parameters Press k / n to select Parameters Resetting parameters to the factory valuesTo reset a certain parameter To reset all parameters Room SIZE/P. Room Size Room size INIT. DLY/P. INIT. DLY Initial delaySound Field Parameter Descriptions Liveness Surround liveness INIT. DLY Surround initial delaySB INI. DLY Surround back initial delay Room Size Surround room size REV. Level Reverberation level REV.DELAY Reverberation delayREV.TIME Reverberation time For THX Cinema DEC 2ch Decoder Select DIALG.LIFT Dialog liftFor 7ch Stereo For DTS Neo6 Music Image Center image General Troubleshooting One side can be Sound suddenlyGoes off Only the speaker on Dolby Digital or DTS Or DTS indicatorVolume level is Record Volume level Tuner Does not learn new Remote controlDoes not work nor Function properly Audio formats Glossary PCM Linear PCM Sound field programs THX Cinema processing Audio informationLFE 0.1 channel Sampling frequency and number Quantized bits Video signal information Specifications