HP M1005 manual To adjust the copy quality for the current job, To adjust the default copy quality

Models: M1005

1 144
Download 144 pages 34.36 Kb
Page 55
Image 55

To adjust the copy quality for the current job

1.On the device control panel, press More Copy Settings twice to see the current quality setting for the copy.

2.Use the < or the > button to scroll through the quality setting options.

3.Select a setting, and then press Start Copy to save the selection and immediately start the copy job, or press Menu/Enter to save the selection without starting the job.

NOTE The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the device control- panel display.

To adjust the default copy quality

1.On the device control panel, press Menu/Enter.

2.Use the < or the > button to select Copy setup, and then press Menu/Enter.

3.Press Menu/Enter to select Default Quality.

4.Use the < or the > button to scroll through the choices.

5.Press Menu/Enter to save the selection.

ENWW

Adjusting the copy quality 45

Page 55
Image 55
HP M1005 manual To adjust the copy quality for the current job, To adjust the default copy quality