HP M1005 manual Physical specifications, Electrical specifications, Power consumption

Physical specifications

Table C-1Physical specifications

Height	Depth	Width	Weight1
308 mm (12.13 inches)	363 mm (14.3 inches)	437 mm (17.2 inches)	8.3 kg (18.4 lb)

1Weight does not include print cartridge, which weighs 0.7 kg (1.5 lb).

Electrical specifications

CAUTION Power requirements are based on the country/region where the device is sold. Do not convert operating voltages. This will damage the device and void the product warranty.

Table C-2Electrical specifications

Item	110-volt models	220-volt models
Power requirements	110 to 127 V (+/- 10%)	220 to 240 V (+/- 10%)
	50 / 60 Hz (+/- 2 Hz)	50 / 60 Hz (+/- 2 Hz)
Rated current	3.5 A	2.5 A

Power consumption

Table C-3Power consumption (average, in watts)1,2

PrintingCopying

227 W 227 W

Ready/Sleep3Off

6 W 0.1 W

1Values are based on preliminary data. See www.hp.com/support/ljm1005 for current information.

2Power reported is highest values measured for monochrome printing/copying using all standard voltages.

3The default time from Ready mode to Sleep mode and the recovery time from Sleep mode to start of printing is less than 10 seconds because of instant-on fusing.

4Maximum heat dissipation for all models in Ready mode = 51.2 BTU/hour.

5Print speed is 15 ppm letter-size and 14 ppm A4-size.

Environmental specifications

Table C-4Environmental specifications

	Recommended1	Operating1
(Device and print cartridge)	20° to 27°C	15° to 32.5°C
Temperature	(68° to 81°F)	(59° to 90.5°F)
Relative humidity	20% to 70%	10% to 80%

Storage1

0° to 40°C

(32° to 104°F)

90% or less

1Values are subject to change. See the support Web sites listed in HP Customer Care for current information.

114 Appendix C Device specifications ENWW