Reducing or enlarging copies

The device can reduce copies to as little as 25% of the original size or enlarge copies to as much as 400% of the original size.

Reduction/enlargement settings

Original=100%

A4 > Ltr=94%

Ltr > A4=97%

Full page=91%

2 pages/sheet

4 pages/sheet

Custom: 25-400%

NOTE For information about using the 2 pages/sheet or 4 pages/sheet setting, see Copying multiple pages on one sheet of paper.

Adjusting the copy size

To reduce or enlarge copies for the current job

1.On the device control panel, press More Copy Settings.

2.Use the < or the > button to select Reduce/Enlarge, and then press Menu/Enter.

3.Use the < or the > button to select the size to which you would like to reduce or enlarge the copies in this job.

NOTE If you select Custom: 25-400%, use the < or the > button to adjust the percentage.

4.Press Start Copy to save the selection and immediately start the copy job, or press Menu/Enter to save the selection without starting the job.

NOTE The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the device control-panel display.

You must change the default media size in the media input tray to match the output size, or part of your copy might be cut off.

ENWW

Reducing or enlarging copies 47

Page 57
Image 57
HP M1005 manual Reducing or enlarging copies, Adjusting the copy size, Reduction/enlargement settings