HP M1005 manual Supported media weights and sizes, Media Dimensions1 Weight Capacity2

Supported media weights and sizes

For optimum results, use conventional 80 to 90 g/m2 (20 to 24 lb) photocopy paper. Verify that the paper is of good quality and is free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, curls, and bent edges.

NOTE The device supports a wide range of standard and custom sizes of print media. The capacity of trays and bins can vary depending on media weight and thickness and on environmental conditions. Use only transparencies that are designed for use with HP LaserJet printers. Inkjet and monochrome transparencies are not supported for the device.

Table 3-1Priority input tray specifications

Media	Dimensions1	Weight	Capacity2
Paper	Minimum: 89 x 44 mm (3.5 x	42 to 260 g/m2 (11 to 69 lb)	Up to 10 sheets of 80 g/m2 or 20
	1.75 inches)		lb paper
	Maximum: 216 x 356 mm (8.5
	x 14 inches)

HP Cover paper3

Transparencies and opaque film

Labels4

Envelopes

Same as the preceding listed minimum and maximum sizes

203 g/m2 (75 lb cover)	1 sheet
Thickness: 0.10 to 0.13 mm	1 transparency
(3.9 to 5.1 mils)
Thickness: up to 0.23 mm (up	1 sheet of labels
to 9 mils)
Up to 90 g/m2 (16 to 24 lb)	Up to 10

1The device supports a wide range of standard and custom sizes of print media. Check the printer driver for supported sizes.

2Capacity can vary depending on media weight and thickness, and environmental conditions.

3Hewlett-Packard does not guarantee results when printing with other types of heavy paper.

4Smoothness: 100 to 250 (Sheffield).

ENWW Supported media weights and sizes 21