
Changing the number of copies
You can choose to have the default number of copies be any number from 1 to 99.
To change the number of copies for the current job
1.On the device control panel, press # Copies.
2.Use the < or the > button to adjust the number of copies, and then press Menu/Enter.
3.Press Start Copy.
NOTE The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the device control- panel display.
To change the default number of copies
1.On the device control panel, press Menu/Enter.
2.Use the < or the > button to select Copy setup, and then press Menu/Enter.
3.Use the < or the > button to select Def. # of copies, and then press Menu/Enter.
4.Use the < or the > button to adjust the number of copies (between 1 and 99) that you want as the default.
5.Press Menu/Enter to save the selection.
NOTE The
ENWW | Changing the number of copies 49 |