Yamaha HTR-6140 owner manual 84 En, Auto Setup

Troubleshooting

■AUTO SETUP

Before AUTO SETUP

Error message	Cause	Remedy	See
			page

Connect MIC! Optimizer microphone is not connected.

Connect the supplied optimizer microphone 24

to the OPTIMIZER MIC jack on the front panel.

Unplug HP!	Headphones are connected.	Unplug the headphones.	—
During AUTO SETUP
Error message	Cause	Remedy	See
			page
E-1:NO FRONT SP	Front L/R channel signals are not detected.	Check the front L/R speaker connections.	11
E-2:NO SUR.SP	A surround channel signal is not detected.	Check the surround speaker connections.	11

E-4:NOISY Background noise is too loud.

Try running “AUTO SETUP” in a quiet	—
environment.
Turn off noisy electric equipment like air	—
conditioners or move them away from the
optimizer microphone.

E-6:NO MIC	The optimizer microphone was unplugged	Connect the supplied optimizer microphone	24
	during the “AUTO SETUP” procedure.	to OPTIMIZER MIC jack on the front
		panel.
E-7:NO SIGNAL	The optimizer microphone does not detect	Check the microphone setting.	24
	test tones.
		Check the speaker connections and	10, 11,
		placement.	24
E-8:USER CANCEL	The “AUTO SETUP” procedure was	Run “AUTO SETUP” again.	24
	cancelled due to user activity.
E-9:INTERNAL ERROR	An internal error occurred.	Run “AUTO SETUP” again.	24

84 En