Operation

EMU27402

Gasoline and oil mixing (100:1)

 

Gasoline to engine

 

oil ratio

 

 

Break-in period

See page 18

 

 

After break-in

100:1

 

 

If equipped with a portable fuel tank

1.Pour oil into the portable fuel tank, and then add gasoline.

1.Engine oil

2.Gasoline

2.Replace the fuel tank cap and close tightly.

3.Shake the fuel tank to mix the fuel thor- oughly.

4.Make sure that the oil and gasoline are mixed.

If equipped with a built-in fuel tank

1.Pour oil into a clean fuel can, and then add gasoline.

2.Replace the fuel can cap and close tight- ly.

3.Shake the fuel can to mix the fuel thor- oughly.

4.Make sure that the oil and gasoline are mixed.

5.Pour the gasoline and oil mixture into the built-in fuel tank.

NOTE:

If using a permanently installed tank, pour the oil gradually as the gasoline is being added to the tank.

EMU27450

Operating engine

EMU27461

Feeding fuel (portable tank)

EWM00420

WARNING

●Before starting the engine, make sure that the boat is tightly moored and that you can steer clear of any obstructions. Be sure there are no swimmers in the water near you.

●When the air vent screw is loosened, gasoline vapor will be released. Gaso- line is highly flammable, and its vapors are flammable and explosive. Refrain from smoking, and keep away from open flames and sparks while loosen- ing the air vent screw.

●This product emits exhaust gases which contain carbon monoxide, a col- orless, odorless gas which could cause brain damage or death when inhaled. Symptoms include nausea, dizziness, and drowsiness. Keep cockpit and cab- in areas well ventilated. Avoid blocking exhaust outlets.

1.If there is an air vent screw on the fuel tank cap, loosen it 2 or 3 turns.

20